Logic Controllers & Displays on Advantage Electric Supply

Pilz PILZ-266815 is a connector designed for supp. voltage connection, featuring a 3-pin connector configuration. This part is specifically manufactured by Pilz to facilitate electrical connections in automation systems.

Pilz PILZ-266707 is an HMI diagnostic and operating panel designed for industrial applications. It operates within an ambient air temperature range of 0 to +50 °C and features a net height of 193.8 mm, a net width of 143.8 mm, and a net depth of 54.3 mm. This unit runs on Windows 10 IOT and supports multiple connection types, including 2 x RJ45 connectors for 1GBit/s Ethernet, 1 x USB host 3.0, 2 x USB hosts 2.0, 1 x HDMI port, and 1 x VGA port. It requires a supply voltage of 12Vdc to 30Vdc, with 24Vdc nominal, and has a power consumption of 23 W. The communication protocol is Ethernet, and it comes with a memory capacity of 4GB RAM and a 32GB SSD.

Pilz PILZ-265607 is a mounting accessory designed as a mounting kit for use with specific automation components.

Pilz PILZ-772030 is a communications unit designed for expansion and communication purposes, featuring a single serial interface. It is intended for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail, and operates within an ambient air temperature range of 0 to +60°C. The unit has a net height of 100 mm, a width of 22.5 mm, and a depth of 120 mm. Connection is facilitated through plug-in/detachable screw or spring-loaded terminals, supporting 2 points per spring-loaded connection with a 9mm stripping length. As part of the Communication module sub-range, it offers an IP20 degree of protection and requires a supply voltage of 20.4-28.8Vdc (24Vdc nominal) or 3.23-3.37Vdc (3.3Vdc nominal) supplied via the base unit. The housing is made from PC material. The communication protocol supported is RS-232. It accommodates a wire cross-section of 0.25 to 2.5mm2 / 24AWG to 12AWG for 1-core flexible with screw connection, 0.2 to 1.5mm2 / 24AWG to 16AWG for 2-core with the same cross-section, flexible without crimp connectors or with TWIN crimp connectors for screw connection, and 0.2 to 2.5mm2 / 24AWG to 12AWG for spring connection. The power consumption from the supply via the base unit is 0.03 W. The unit is designed for storage in ambient air temperatures ranging from -25 to +70°C and has a rated insulation voltage (Ui) of 30 V.

Pilz PILZ-772134 is a communications unit designed for automation systems, featuring a communication module with EtherCAT and CANopen over EtherCAT fieldbus interfaces. It includes a peripheral device type with galvanic isolation for potential isolation between the fieldbus and module voltage, ensuring functional insulation with a rated surge voltage of 500V. This unit is suitable for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail, and operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with it. The unit has a net height of 101.4 mm, a rated current of 35mA for the maximum external power supply continuous current, and offers connection options via RJ45 for interface connections or screw or spring-loaded terminal connections. It falls under the sub-range name of communication modules, with dimensions of W27mm x D115 mm x H22.5 mm, and an IP20 degree of protection. The supply voltage ranges from 19.2-30Vdc, with a nominal 24Vdc and an additional 3.3Vdc for module supply via the base unit. Constructed with a PC housing in green, it supports a wire cross-section of 0.25 to 2.5mm2 for various connection types and has a power consumption of 0.9 W from an external power supply or 0.2 W from supply via the base unit. The unit is designed for storage in temperatures ranging from -25 to +70°C, features galvanic isolation protection functions, a rated insulation voltage of 30 V for potential isolation, and supports a transmission rate of 100MBit/s via EtherCAT, with a current consumption of 60mA from the supply via the base module and maximum power dissipation/losses of 1.5 W.

7” HMI 1024x600 16.2M-color HMI 1GHz RISC CPU Dual Ethernet, Built-in EA 2.0

7” HMI 1024x600, 1GHz RISC CPU Dual Ethernet, with CoDeSys and Built-in EA 2.0

Pilz PILZ-328310 is an I/O unit designed for backplane or rackmount installation, featuring a digital output electronic module. It supports a maximum rated current of 2A with one output under load and 1.5A with two outputs under load, within a permitted output current range of 0-0.625A. The unit offers potential isolation between semiconductor output and module supply with functional insulation, rated for a surge voltage of 2500V. It operates within an ambient air temperature range of 0 to +55°C and has a net height of 110.8 mm. The design includes device code 001Ah with 4 ST output bits plus 4 ST status bits. Connection is facilitated through plug-in/detachable cage-clamp terminal connections. As a standard I/O module, it features an IP20 degree of protection and requires a supply voltage of 16.8-30Vdc (24Vdc nominal). The housing is made of PPE material, with a net width of 12.5 mm and a net depth of 72.5 mm. Power consumption is minimal, with 0.15 W for module supply and up to 0.6 W for maximum power consumption of a positive-switching 1-pole semiconductor output. It can store within an ambient air temperature range of -40 to +70°C. The unit includes 4 x digital outputs (1-pole positive switching semiconductor outputs; 24Vdc; 0.5A), ensuring short-circuit proof operation and potential isolation. Power dissipation/losses are capped at a maximum of 0.9 W, with processing times for output signals ranging from a maximum of 0.35 ms for "1" to "0" signal and 0.22 ms for "0" to "1". The internal voltage drop is noted at 0.06 V.

Pilz PILZ-328206 is an I/O unit designed for backplane or rackmount installation, featuring digital input electronic modules with potential isolation between input and module supply, and functional insulation rated at a surge voltage of 2500V. It operates within an ambient air temperature range of 0 to +55 °C and has a net height of 110.8 mm. This unit is part of the Standard I/O module sub-range, with a degree of protection rated at IP20 and requires a supply voltage of 16.8-30Vdc (24Vdc nominal). The housing is made from PPE material, and the unit has a net width of 12.5 mm and a net depth of 72.5 mm. It can be connected via plug-in/detachable cage-clamp terminal connections and has a power consumption of 0.11 W at input and 0.12 W for module supply. The PILZ-328206 supports 4 x digital inputs (24Vdc; 3-3.5mA; type 3 to IEC61131-2; -3...+5Vdc at "0"; +11...+30Vdc at "1"), with a maximum power dissipation/losses of 0.6 W. It features a processing time for input signals ranging from 0.005 to 0.3 ms, with a software filter time of 0 to 25.5 ms, and is designed for storage in ambient air temperatures of -40 to +70 °C.

Pilz PILZ-328092 is a Safety I/O unit designed for backplane or rackmount installation. It features a digital output electronic safety module with permitted load types including inductive, capacitive, and resistive. The unit provides potential isolation between the semiconductor output and module supply, as well as between the periphery supply and module supply, both with functional insulation and a rated surge voltage of 2500V. It operates within an ambient air temperature range of 0 to +55°C and has a net height of 110.8 mm. The design includes device code 4044h with 8 ST output bits plus 8 ST status bits. The rated current ranges from 0 to 0.625A for permitted output current, with a residual current of 0.02mA at a "0" signal and a maximum transient pulsed output current of 12A. Connection is facilitated through plug-in/detachable cage-clamp terminal connections. This Safe I/O module, with a degree of protection IP20, requires a supply voltage of 16.8-30Vdc (24Vdc nominal) and is housed in PPE material. The net width is 12.5 mm, and the net depth is 72.5 mm. It can be stored in ambient air temperatures ranging from -40 to +70°C. The module features 8 digital outputs (1-pole positive-switching semiconductor outputs; 24Vdc; 0.5A), includes short-circuit proof potential isolation, and has a current consumption of 55mA with no load. Power consumption is 0.65W for module supply, 1.65W for periphery supply module power consumption with no load, and 0.05W for semiconductor output. Power dissipation/losses can reach up to 2.7W. The processing time ranges from 0.1-12.7 ms for the maximum duration ON/OFF time during self-test, with an output processing time of max. 8 ms for "1" to "0" and "0" to "1" signal changes. The internal voltage drop is 0.08 V.