RSS 36-I1-D-R-ST Schmersal Electronic Components

Product Details

• Voltage, Utilisation category DC13
  24 VDC
• Interfering radiation
  IEC 61000-6-4
• Voltage, Utilisation category DC12
  24 VDC
• Current, Utilisation category DC12
  0.05 A
• Current, Utilisation category DC13
  0.05 A
• Current leakage Ir
  0.5 mA
• Rated operating current (safety outputs)
  250 mA
• Rated operating voltage, maximum
  26.4 VDC
• Height of sensor
  25 mm
• Housing construction form
  Block
• EMC rating
  IEC 60947-3
• Voltage drop Ud, maximum
  2 V
• Switching frequency, approx.
  1 Hz
• Versions
  p-type
• Output current, (fail-safe output), maximum
  0.25 A
• Required rated short-circuit current to EN 60947-5-1
  100 A
• Operating current
  600 mA
• Rated operating voltage, minimum
  20.4 VDC
• Rated operating voltage
  24 VDC −15 % / +10 %
• Voltage type
  DC (direct current)
No-load supply current I0
100 mA
Overvoltage category
III
Degree of pollution to VDE 0100
3
Protection rating
III
Rated impulse withstand voltage Uimp
0.8 kV
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 1 mm
Material temperature resistance (long-term), maximum
+105 °C
Rated insulation voltage Ui
32 VDC
Restistance to shock
30 g / 11 ms
Storage and transport temperature, maximum
+85 °C
Material temperature resistance of the cable (at rest), minimum
-30 °C
Material temperature resistance of the cable (in motion), minimum
-10 °C
Degree of protection
IP65 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Ambient temperature, minimum
-25 °C
Storage and transport temperature, minimum
-25 °C
Ambient temperature, maximum
+70 °C
Width of sensor
106.3 mm
Length of sensor
22 mm
Ensured switch distance ON Sao
10 mm
Terminal Connector
Connector M12, 8-pole
Note
The cable section of the interconnecting cable must be observed! Cable length and cable section alter the voltage drop depending on the output current
Ensured switch distance OFF Sar
20 mm
Switch distance
12 mm
Latching force
18 N
Mounting
A screw length of 25 mm is sufficient for sensor mounting and for side mounting of the actuators. 30 mm long screws are recommended when the actuator is mounted upright and/or when the sealing discs are used.
Note (Repeat accuracy R)
Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 8 mm (e.g. mounting tolerance or due to guard door sagging). The axial misalignment (y) is max. ± 18 mm (see figure: Operating principle). Minimum clearance
Hysteresis (Switch distance), maximum
2 mm
Actuating panels
lateral
Number of LEDs
3
Safety functions
Yes
Number of fail-safe digital outputs
2
Number of semi-conductor outputs with signaling function
1
Repeat accuracy R R
0.5 mm
Integral System Diagnostics, status
Yes
Cascadable
Yes
Latching
Yes
Time to readiness, maximum
2,000 ms
Short circuit detection
Yes
Short-circuit recognition
Yes
Gross weight
80 g
Reaction time, maximum
100 ms
Diagnostic output
Yes
Duration of risk, maximum
200 ms
Standards
IEC 60947-5-3
Active principle
RFID
Sensor topology
Sensor for series wiring
Coding level according to ISO 14119
High
Active area
lateral
Installation conditions (mechanical)
not flush
general information
Individual coding
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing

Related documents RSS 36-I1-D-R-ST Specs