RSS16-D-ST8H Schmersal Safety Switches

Product Details

• Hysteresis (Switch distance), maximum
  2 mm
• Mounting
  2 x M5, Cylinder head screw
• Active area
  lateral, front side, cover-side
• Actuating panels
  front side, rear, from head
• Number of fail-safe digital outputs
  2
• Number of semi-conductor outputs with signaling function
  1
• Integral System Diagnostics, status
  Yes
• Interfering radiation
  IEC 61000-6-4
• EMC rating
  IEC 60947-3
• Current, Utilisation category DC13
  0.05 A
• Voltage, Utilisation category DC13
  24 VDC
• Current, Utilisation category DC12
  0.05 A
• Voltage, Utilisation category DC12
  24 VDC
• Voltage drop Ud, maximum
  2 V
• Current leakage Ir
  0.5 mA
• Output current, (fail-safe output), maximum
  1 A
• Versions
  p-type
• Rated operating current (safety outputs)
  1,000 mA
• Switching frequency, approx.
  1 Hz
• Required rated short-circuit current to EN 60947-5-1
  100 A
Operating current
50 mA
Rated operating voltage, minimum
20.4 VDC
Rated operating voltage, maximum
26.4 VDC
No-load supply current I0
100 mA
Degree of pollution to VDE 0100
3
Voltage type
DC (direct current)
Overvoltage category
III
Rated impulse withstand voltage Uimp
0.8 kV
Rated insulation voltage Ui
32 VDC
Restistance to shock
30 g / 11 ms
Protection rating
0
Storage and transport temperature, minimum
-25 °C
Storage and transport temperature, maximum
+85 °C
Ambient temperature, maximum
+70 °C
Width of sensor
52 mm
Degree of protection
IP65 to EN 60529, IP66 to EN 60529, IP67 to EN 60529
Height of sensor
30 mm
Ambient temperature, minimum
-25 °C
Length of sensor
91 mm
Note
The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current
Terminal Connector
Connector M12, 8-pole
Ensured switch distance OFF Sar
30 mm
Ensured switch distance ON Sao
12 mm
Switch distance
15 mm
Tightening torque of nuts, maximum
2 Nm
Repeat accuracy R R
0.5 mm
Series-wiring
Yes
Cascadable
Yes
Number of LEDs
2
Safety functions
Yes
Diagnostic output
Yes
Short-circuit recognition
Yes
Short circuit detection
Yes
Duration of risk, maximum
200 ms
Reaction time, maximum
100 ms
Gross weight
160 g
Sensor topology
Sensor for series wiring
Time to readiness, maximum
2,000 ms
Active principle
RFID
Housing construction form
Block
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Installation conditions (mechanical)
not flush
general information
Universal coding
Standards
IEC 60947-5-3
Coding level according to ISO 14119
Low

Related documents RSS16-D-ST8H Specs