RSS 36-SD-ST Schmersal Electronic Components

Product Details

• Voltage drop Ud, maximum
  2 V
• Interfering radiation
  IEC 61000-6-4
• Voltage, Utilisation category DC13
  24 VDC
• Current leakage Ir
  0.5 mA
• Versions
  p-type
• Operating current
  150 mA
• Rated impulse withstand voltage Uimp
  0.8 kV
• Storage and transport temperature, maximum
  +85 °C
• Mounting
  A screw length of 25 mm is sufficient for sensor mounting and for side mounting of the actuators. 30 mm long screws are recommended when the actuator is mounted upright and/or when the sealing discs are used.
• EMC rating
  IEC 60947-3
• Voltage, Utilisation category DC12
  24 VDC
• Current, Utilisation category DC13
  0.25 A
• Current, Utilisation category DC12
  0.25 A
• Output current, (fail-safe output), maximum
  0.25 A
• Rated operating current (safety outputs)
  250 mA
• Switching frequency, approx.
  1 Hz
• Required rated short-circuit current to EN 60947-5-1
  100 A
• Rated operating voltage, minimum
  20.4 VDC
• Rated operating voltage
  24 VDC −15 % / +10 %
• Rated operating voltage, maximum
  26.4 VDC
Voltage type
DC (direct current)
No-load supply current I0
100 mA
Degree of pollution to VDE 0100
3
Overvoltage category
III
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 1 mm
Rated insulation voltage Ui
32 VDC
Protection rating
III
Restistance to shock
30 g / 11 ms
Material temperature resistance of the cable (at rest), minimum
-30 °C
Material temperature resistance (long-term), maximum
+105 °C
Material temperature resistance of the cable (in motion), minimum
-10 °C
Storage and transport temperature, minimum
-25 °C
Ambient temperature, maximum
+70 °C
Height of sensor
25 mm
Ambient temperature, minimum
-25 °C
Degree of protection
IP65 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Switch distance
12 mm
Width of sensor
106.3 mm
Length of sensor
22 mm
Note
The cable section of the interconnecting cable must be observed! Cable length and cable section alter the voltage drop depending on the output current
Terminal Connector
Connector M12, 8-pole
Ensured switch distance ON Sao
10 mm
Ensured switch distance OFF Sar
20 mm
Repeat accuracy R R
0.5 mm
Hysteresis (Switch distance), maximum
2 mm
Number of Series-wiring of sensors
31
Note (Repeat accuracy R)
Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 8 mm (e.g. mounting tolerance or due to guard door sagging). The axial misalignment (y) is max. ± 18 mm (see figure: Operating principle). Minimum clearance
Actuating panels
lateral
Number of fail-safe digital outputs
2
Number of semi-conductor outputs with signaling function
1
Number of LEDs
3
Integral System Diagnostics, status
Yes
Cascadable
Yes
Short circuit detection
Yes
Diagnostic output
Yes
Safety functions
Yes
Short-circuit recognition
Yes
Duration of risk, maximum
200 ms
Serial diagnostics
Yes
Standards
IEC 60947-5-3
Installation conditions (mechanical)
not flush
Reaction time, maximum
100 ms
general information
Universal coding
Housing construction form
Block
Active principle
RFID
Time to readiness, maximum
2,000 ms
Coding level according to ISO 14119
Low
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Gross weight
85 g
Active area
lateral
Sensor topology
Sensor for series wiring

Related documents RSS 36-SD-ST Specs