RSS260-I1-ST-AS Schmersal Electronic Components

Product Details

• AS-i Parameter bits, P3
  Internal device error (FID)
• AS-i Input module address
  0
• Note (AS-i Input module address)
  Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
• Note (AS-i Parameter bits)
  Set the parameter outputs to "1111" (0xF), FID: periphery error
• AS-i Parameter bits, P2
  No function
• AS-i Parameter bits, P1
  Enabling inhibit (tamper protection time) active (FID))
• AS-i Parameter bits, P0
  Actuator in
• AS-i, ID-Code2
  0xE
• AS-i Outputs, DO 0 … DO 3
  No Function
• AS-i Input, Channel 2
  Data bits DI 2 / DI 3 = dynamic code transmission
• AS-i, ID-Code
  0xB
• AS-i Input, Channel 1
  Data bits DI 0 / DI 1 = dynamic code transmission
• AS-i, ID-Code1
  0xF
• AS-i Profile
  S-0.B.F.E
• AS-i, IO-Code
  0x0
• AS-i Specification
  Safety-Slave
• AS-i Version
  V 2.1
• AS-i Current consumption, maximum
  100 mA
• AS-i Operating voltage AS-i maximum
  31.6 VDC
• AS-i Operating voltage, minimum
  18 VDC
Note (AS-i Operating voltage)
Protection against polarity reversal
Switching frequency, maximum
1 Hz
Degree of pollution to VDE 0100
3
Rated impulse withstand voltage Uimp
0.8 kV
Overvoltage category
III
Rated insulation voltage Ui
32 VDC
Protection rating
III
Storage and transport temperature, maximum
+85 °C
Restistance to shock
30 g / 11 ms
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 1 mm
Storage and transport temperature, minimum
-25 °C
Ambient temperature, maximum
+60 °C
Ambient temperature, minimum
-25 °C
Ensured switching distance OFF, front
18 mm
Length of sensor
18 mm
Height of sensor
29.5 mm
Width of sensor
40 mm
Terminal Connector
Connector M8, 4-pole, A-coded
Degree of protection
IP65 to EN 60529, IP67 to EN 60529
Ensured switch distance OFF Sar, lateral
15 mm
Ensured switching distance ON, side
6 mm
Repeat accuracy R R
0.5 mm
Ensured switching distance ON, front
10 mm
Switch distance Sn
12 mm, 9 mm (in case of approach from side)
Hysteresis (Switch distance), maximum
2 mm
Integral System Diagnostics, status
Yes
Number of actuating directions
2
Coding
Yes
Safety functions
Yes
Duration of risk, maximum
200 ms
Reaction time, maximum
100 ms
general information
Individual coding
Enclosure material
Thermoplastic hotmelt
Active principle
RFID
Time to readiness, maximum
2,000 ms
Gross weight
55 g
Standards
IEC 61508, IEC 60947-5-3, EN ISO 14119
Coding level according to ISO 14119
High

Related documents RSS260-I1-ST-AS Specs