AZM300Z-I1-ST-1P2P-T Schmersal Safety Switches

Product Details

• Test pulse interval, typical
  1000 ms
• Voltage, Utilisation category DC13
  24 VDC
• Current leakage Ir
  0.5 mA
• Voltage, Utilisation category DC12
  24 VDC
• Current, Utilisation category DC12
  0.05 A
• Current, Utilisation category DC13
  0.05 A
• Voltage drop Ud, maximum
  4 V
• Versions
  short-circuit proof, p-type
• Classification ZVEI CB24I, Source
  C2
• Classification ZVEI CB24I, Sink
  C1, C2
• Test pulse interval, minimum
  100 ms
• Duty cycle solenoid
  100 %
• Test pulse duration, maximum
  0.5 ms
• Current consumption at 24V
  5 mA
• Switching thresholds
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Switching frequency, maximum
  0.5 Hz
• External wiring and device fuse rating
  2 A gG
• Current consumption with solenoid ON, peak
  350 mA / 200 ms
• Required rated short-circuit current to EN 60947-5-1
  100 A
• Current consumption with solenoid ON, average
  200 mA
No-load supply current I0
100 mA
Notes (Power supply, general)
stabilised PELV power supply
Rated impulse withstand voltage Uimp
0.8 kV
Degree of pollution to IEC/EN 60664-1
3
Operating voltage, maximum
26.4 VDC
Operating voltage, minimum
20.4 VDC
Overvoltage category
III
Rated insulation voltage Ui
32 VDC
Restistance to shock
30 g / 11 ms
Zulässige Aufstellhöhe über NN, maximum
2,000 m
Protection rating
III
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Note (Relative humidity)
non-condensing, non-icing
Relative humidity, maximum
93 %
Storage and transport temperature, maximum
+90 °C
Ambient temperature, maximum
+60 °C
Width of sensor
87.5 mm
Storage and transport temperature, minimum
-10 °C
Ambient temperature, minimum
+0 °C
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Height of sensor
55 mm
Length of sensor
146 mm
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
general information
Individual coding
Length of sensor chain, maximum
200 m
Terminal Connector
Connector M12, 8-pole, A-coded
Ensured switch distance ON Sao
1 mm
Tightening torque for the fixing screws, maximum
7 Nm
Ensured switch distance OFF Sar
20 mm
Tightening torque of the fixing screws, minimum
6 Nm
Switch distance
2 mm
Type of the fixing screws
2x M6
Latching force, adjustable, position 2
50 N
Latching force, adjustable, position 1
25 N
Clamping force, maximum Fmax
1,500 N
Clamping force in accordance with ISO14119 Fzh
1,150 N
Angular offset between interlocking device and actuator, maximum
2 °
Standards
IEC 61508, IEC 60947-5-3, EN ISO 13849-1
Note (Mechanical lifetime)
When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
Mechanical life, minimum
1,000,000 Operations
Integral System Diagnostics, status
Yes
Number of fail-safe digital outputs
2
Safety functions
Yes
Series-wiring
Yes
Short-circuit recognition
Yes
Latching
Yes
Short circuit detection
Yes
Time to readiness, maximum
5,000 ms
Emergency exit
Yes
Power to unlock
Yes
Guard locking monitored
Yes
Gross weight
647 g
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Duration of risk, maximum
200 ms
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Coding level according to ISO 14119
High
Transmit power, maximum
-6 dB/m
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Frequency band RFID
125 kHz
Active principle
RFID

Related documents AZM300Z-I1-ST-1P2P-T Specs