Advantage Electric Supply Logo

UB10.241 Puls UPS (DC)

UB10.241 on Advantage Electric Supply
Puls

Part#:UB10.241

Manufacturer:Puls

Category:UPS (DC)

Product Lifecycle:Active

Get a quick Quote!

PULS UB10.241 is an Uninterruptible Power Supply (UPS) control module from the UB-series, featuring an external battery before time limiter and end-of-charge voltage control with a 50% power reserve and a green status LED. It is housed in aluminium and utilizes spring-clamp connections for connectivity. The dimensions of this unit are W49mm x H124mm x D117mm. It operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc, and supports a rated current of 10A at 22.5Vdc and 15A in buffer mode for less than 5 seconds at full output voltage. The output in normal mode is 15A, and in buffer mode, it can deliver 10A/15A (360W). Designed for DIN rail mounting, it can operate in ambient air temperatures ranging from -25 to +70°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. It features protection functions against output overvoltage (32Vdc typical, 35Vdc maximum) and overload/short-circuit conditions, with a minimum of 17.9A and a maximum of 21A at load impedance. It is not suitable for parallel use to increase output power but can be paralleled for 1+1 redundancy. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input. The rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp from 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, and 15 years/131400 hours at both 40°C with a 5A output and 25°C with a 10A output, all at 24Vdc input.

About the manufacturer: Puls is one of the manufacturers that offers UPS (DC) that you can order at Advantage Electric Supply site. Puls specializes in AC/DC power supplies, dedicating its efforts solely to the development of premium DIN rail power supplies. As a leading authority in power conversion, Puls distinguishes itself through focused engineering and an unwavering commitment to quality, positioning itself as the top leader in the field. This dedication ensures the highest standard in the industry, reflecting in every product they offer.

Check out the UB10.241 Puls price in the box on the right side or send a quick quote.

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Manufacturer warranty

$550.00

Select Qty:

$550.00

$550.00 each

Average response time: 11 minutes

Fast Shipping & Delivery

We deliver nationwide and international

Secure Payment Processing

with money back guarantee

Warranty On All Parts

Manufacturer warranty

Responsive Customer Support

Let us know how we can help!

Need more details?

Feel free to chat with us

Relevant products

UB10.245 on Advantage Electric Supply

UB10.245

Verified stock: 0

PULS UB10.245 is an Uninterruptible Power Supply (UPS) control module from the UB-series, featuring an external battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for its connections. It measures W49mm x H124mm x D117mm and operates on a supply voltage range of 22.5Vdc-30Vdc (24Vdc nominal). The rated current is 10A at 22.5Vdc with Output 1 providing 15A in normal mode and 10A/15A (360W) in buffer mode. Output 2 delivers 12V; 5A in both normal and buffer modes. Designed for DIN rail mounting, it can operate in ambient air temperatures ranging from -25 to +70°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. It features protection functions against output overvoltage (32Vdc typical / 35Vdc max.) and overload/short-circuit current (min. 17.9A, max. 21A at load impedance). The output voltage is 22.5Vdc and 12Vdc (regulated) in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.975 with a 24Vdc input, and the rated power is 360W (at 24Vdc) and 240W/360W in buffer mode. Power dissipation/losses are 3.4 W at no load and 6 W with a 10A output current at 24Vdc input. Ripple is 20mVpp (20Hz...20MHz; 50Ω), and electrical durability is rated at 114000 hours at 40°C with a 10A output and 24Vdc input, 148000 hours at 40°C with a 5A output and 24Vdc input, and 380000 hours at 25°C with a 10A output and 24Vdc input.

Puls

UB10.242 on Advantage Electric Supply

UB10.242

Verified stock: 0

PULS UB10.242 is an Uninterruptible Power Supply (UPS) control module from the UB-series, featuring an external battery with temperature control and a 50% power reserve. It includes a green status LED for visual indication of operational states such as Ready, Buffering, Inhibit, and Replace Battery. The device is housed in an aluminium casing and utilizes spring-clamp connections for secure and efficient connectivity. With dimensions of W49mm x H124mm x D117mm, it supports a supply voltage range of 22.5Vdc to 30Vdc (24Vdc nominal) and offers a rated current of 10A at 22.5Vdc and 15A in buffer mode for less than 5 seconds at full output voltage. The UB10.242 is designed for DIN rail mounting and can operate in ambient air temperatures ranging from -25 to +50°C. It consumes 2A at a 24Vdc input and up to 2.7A max., with an efficiency of 0.978 at 24Vdc input. The rated power is 360W at 24Vdc and 240W/360W in buffer mode, with power dissipation/losses of 2.9W at 0A output current and 5.5W at 10A output current. The ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. Its electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output. The device ensures protection against output overvoltage (32Vdc typical, 35Vdc max.) and overload/short-circuit conditions, with a minimum short-circuit current of 17.9A (max. 21A) at load impedance. It is not designed for parallel use to increase output power but supports 1+1 redundancy for enhanced system reliability.

Puls

CP10.241 on Advantage Electric Supply

CP10.241

Verified stock: 4

PULS CP10.241 is a DIN rail mounting power supply unit housed in an aluminium casing, designed to operate within an ambient air temperature range of -25 to +70°C. It features a net width of 39 mm and offers a degree of protection rated at IP20. The unit consumes current at rates of 1.13A with a 230Vac input, 2.15A with a 120Vac input, 2.6A with a 100Vac input, and 2.35A with a 110Vdc input for a 24Vdc / 10A output, with peak inrush currents of 11A and 7A for 230Vac and 120Vac inputs respectively. Efficiency rates are noted at 0.952 for 230Vac input and 0.936 for 120Vac input. Dimensions are specified as W39mm x H124mm x D117mm. The unit exhibits a start-up delay of 240-300ms for 100-230Vac input, with rise times of 30ms and 160ms under specified conditions. It includes protection functions against output overvoltage, overload/short-circuit, and over-temperature, with automatic restart features. Series or parallel operation is supported for increased output voltages or power, including 1+1 redundancy with a redundancy module. The unit is resistant to back-feeding loads up to 35V. Power dissipation/losses are 12.1W and 16.4W for 230Vac and 120Vac inputs respectively, with an output stage capacitance of 4400µF. Electrical durability spans from 75,000 to 499,000 hours under various conditions. Ripple is maintained at 50mVpp. This AC/DC power supply unit, part of the CP-series, is designed with ATEX approval, a 20% power reserve, and a DC-OK relay contact output. Connection is facilitated via screw-clamp connections. Supply voltage ranges from 88Vdc-180Vdc for DC and 85Vac-264Vac for AC, with specific tolerances for overvoltage and shutdown voltages. Rated current is 12A at 48Vdc in temperatures up to +45°C, with adjustments for higher temperatures. It operates on a single-phase (1AC) or DC network, providing a rated power of 288W at -25 to +45°C, 240W at -25 to +60°C, and 180W at +70°C, with a linear derating between +60°C and +70°C. The output voltage is adjustable between 24Vdc and 28Vdc, featuring a 200mV turn-ON overshoot and a hold time of 37ms at 120/230Vac input.

Puls

XT40.482 on Advantage Electric Supply

XT40.482

Verified stock: 1

PULS XT40.482 is a power supply unit part of the X-series, designed to function as an AC/DC PSU/converter with a semi-regulated 25% power reserve and a DC-OK relay contact output. It operates with a supply voltage of 3x432-528Vac (440Vac / 480Vac / 500Vac / 525Vac nominal; 47-63Hz), a turn-on voltage of 3 x 390Vac, and a shutdown voltage of 3 x 355Vac. The unit's dimensions are W96mm x H124mm x D159mm, and it is housed in an aluminium casing with screw-clamp connections for installation. It supports a rated current of 20A at 48Vdc and is designed for DIN rail mounting in a 3-phase (3AC) network. The XT40.482 can operate in ambient air temperatures ranging from -25 to +70°C. It has a peak inrush current consumption of 4A (at 3x480Vac input), a rated power of 960W at 48Vdc (1200W for typ. 15s), and includes protection functions such as output overvoltage protection (57.2Vdc max.) and overload/short-circuit current protection. The unit is not intended for parallel operation to increase output power but can be used in a 1+1 redundancy setup for higher system availability. It features an efficiency of 0.96 (at 3x480Vac input), a 350ms start-up delay, and a hold time of 3.1ms at 3x480Vdc input. Power dissipation losses are 40W at full output load, and it has an electrical durability of up to 15 years or 131400 hours at 25°C with a 20A output. The output stage capacitance is 7600µF, and the ripple is 2500mVpp (20Hz...2KHz; 50Ω).

Puls

ML30.241 on Advantage Electric Supply

ML30.241

Verified stock: 1

PULS ML30.241 is a power supply unit designed for AC/DC conversion with DIN rail mounting capabilities. It operates within an ambient air temperature range of -10 to +70°C and adheres to NEC Class 2 design specifications. This unit provides a rated current of 1.3A at 24Vdc and features screw-clamp connections for secure installation. It supports a wide supply voltage range from 85Vac to 264Vac across various nominal values and frequencies, with specific turn-ON and shutdown voltages at 46Vac and 44Vac, respectively. Additionally, it can accept DC supply voltages between 88Vdc and 375Vdc. The ML30.241 is housed in a PC/ABS blend material and is suitable for single-phase (1AC) or DC networks. It measures 23mm in width, 75mm in height, and 91mm in depth. The unit's rated power is 30W, and it offers an adjustable output voltage range from 24Vdc to 28Vdc. It incorporates an NTC for input inrush current limiting, achieves an efficiency of up to 0.894 depending on the input voltage, and has a maximum inrush current consumption of 35A at 230Vac input. The power supply features a 90ms start-up delay, with rise times varying based on input conditions and load capacitance. Power dissipation is noted at 3.7W, and it boasts an electrical durability of at least 174,000 hours at +40°C. The ripple is maintained at 50mVpp across a 20Hz to 20MHz range, and the output stage capacitance is 900µF.

Puls

What can I help you find today?

Recommended parts