Name: 2002-1304
Brand: WAGO

2002-1492

Wago 2002-1492 is an end and intermediate plate designed for use with the TOPJOB S series. It features a rated impulse voltage (Uimp) of 0.8 mm and is constructed from Polyamide (PA) 66. The part is orange in color and has dimensions of H70mm x W0.8mm x D33mm.

WAGO

2002-2201

Verified stock: 1

Wago 2002-2201 is a feed-through terminal block featuring push-in CAGE CLAMP spring connections. It is designed with 2 decks/levels and is suitable for Ex e II applications. This terminal block supports a rated current of 24A (IEC), 28A (IEC), 20A (UL), 20A (CSA), 20A (Ex e II), and 18A (Ex e II with jumper). It has a net height of 6 kV for IEC standards and a rated impulse voltage (Uimp) of 5.2 mm. The net width accommodates 2 feed-through poles (2P), and it is designed for mounting on a DIN-35 rail. The terminal block is colored gray and has dimensions of H69.7mm x W5.2mm x D51.7mm. It is compatible with 0.25mm2 to 4mm2 fine stranded or solid conductors and #22AWG to #12AWG fine stranded or solid conductors, with a 2.5mm2 nominal cross-section. The material is Polyamide (PA) 66, and it includes 4-wires (2 push-in + 2 push-in) for connections. The terminal block supports a voltage of 500 V (IEC), 300 V (UL), 600 V (CSA), and 440 V (Ex e II), and is part of the TOPJOB S series.

WAGO

2002-404

Verified stock: 196

Wago 2002-404 is an insulated push-in type comb-style jumper bar designed for use in the TOPJOB S series. It features a 4-way design, suitable for 4-poles (4P) configurations, and supports a rated current of 25A. The part has a net width of 4mm and is characterized by its dimensions: H4.1mm x W19.1mm x D19mm. It is designed to operate with a maximum voltage of 800V. The color of the part is light gray, indicating its power consumption category.

WAGO

2002-1392

Verified stock: 4

Wago 2002-1392 is an end plate designed for use with the TOPJOB S series, serving both end and intermediate plate functions. It features a rated impulse voltage (Uimp) of 0.8 mm and is constructed from Polyamide (PA) 66. The part is characterized by its dimensions, H59.5mm x W0.8mm x D33mm, and is presented in orange.

WAGO

2002-408

Verified stock: 9

Wago 2002-408 is an insulated push-in type comb-style jumper bar designed for use in the TOPJOB S series. It features an 8-way design, suitable for facilitating connections across 8 poles (8P) with a net width corresponding to the 8-pole configuration. This busbar is rated for a current of 25A and can withstand voltages up to 800V. Its dimensions are H4.1mm x W39.9mm x D19mm, ensuring it fits within standard configurations. The part is presented in light gray, aligning with typical industrial aesthetics and identification standards.

WAGO

2002-1301

Verified stock: 20

Wago 2002-1301 is a feed-through terminal block featuring push-in CAGE CLAMP spring connections. It supports a variety of rated currents including 24A (IEC), 32A (IEC), 20A (UL), 20A (CSA), 22A (Ex e II), and 20A (Ex e II with jumper). This 1-deck terminal block is designed with side and center marking slots, making it suitable for Ex e II applications. It has a net height of 8 kV for impulse voltage, a width accommodating 1 feed-through pole (1P), and is compatible with DIN-35 rail mounting. The terminal block is colored gray and measures H59.2mm x W5.2mm x D32.9mm. It accepts wire sizes from 0.25mm2 to 4mm2 for fine stranded or solid conductors and #22AWG to #12AWG for fine stranded or solid conductors, with a 2.5mm2 nominal cross-section. The material is Polyamide (PA) 66, and it includes 3-wire connections (1 push-in + 2 push-in) (1+2). The terminal block is rated for voltages up to 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II), and is part of the TOPJOB S series.

WAGO

2002-1407

Verified stock: 893

Wago 2002-1407 is a ground/earthing terminal block featuring push-in CAGE CLAMP spring connections. It is designed with a single deck/level, including side and center marking slots, and is suitable for Ex e II applications. This terminal block has a rated impulse voltage (Uimp) of 5.2 mm and a net width for 1 grounding / protective-earth (1PE). It is designed for mounting on DIN-35 rail (35 x 15 / 35 x 7.5) and exhibits a green-yellow color for easy identification. The dimensions are H69.9mm x W5.2mm x D32.9mm, accommodating 0.25mm2 to 4mm2 fine stranded or solid conductors and #22AWG to #12AWG fine stranded or solid conductors with a 2.5mm2 nominal cross-section. The terminal block is made from Polyamide (PA) 66 and supports 4-wires (2 push-in + 2 push-in) (2+2) connections. It is part of the TOPJOB S series.

WAGO

2002-2292

Verified stock: 911

Wago 2002-2292 is an end and intermediate plate designed for use with the TOPJOB S series. It features a rated impulse voltage (Uimp) of 0.8 mm and is constructed from Polyamide (PA) 66. The dimensions of this part are H69.7mm x W0.8mm x D51.7mm. Its color is orange, indicating its function and compatibility within the system.

WAGO

2002-1492

Verified stock: 1

Wago 2002-1492 is an end and intermediate plate designed for use with the TOPJOB S series. It features a rated impulse voltage (Uimp) of 0.8 mm and is constructed from Polyamide (PA) 66. The part is orange in color and has dimensions of H70mm x W0.8mm x D33mm.

WAGO

2002-2201

Verified stock: 1

Wago 2002-2201 is a feed-through terminal block featuring push-in CAGE CLAMP spring connections. It is designed with 2 decks/levels and is suitable for Ex e II applications. This terminal block supports a rated current of 24A (IEC), 28A (IEC), 20A (UL), 20A (CSA), 20A (Ex e II), and 18A (Ex e II with jumper). It has a net height of 6 kV for IEC standards and a rated impulse voltage (Uimp) of 5.2 mm. The net width accommodates 2 feed-through poles (2P), and it is designed for mounting on a DIN-35 rail. The terminal block is colored gray and has dimensions of H69.7mm x W5.2mm x D51.7mm. It is compatible with 0.25mm2 to 4mm2 fine stranded or solid conductors and #22AWG to #12AWG fine stranded or solid conductors, with a 2.5mm2 nominal cross-section. The material is Polyamide (PA) 66, and it includes 4-wires (2 push-in + 2 push-in) for connections. The terminal block supports a voltage of 500 V (IEC), 300 V (UL), 600 V (CSA), and 440 V (Ex e II), and is part of the TOPJOB S series.

WAGO

2002-404

Verified stock: 196

Wago 2002-404 is an insulated push-in type comb-style jumper bar designed for use in the TOPJOB S series. It features a 4-way design, suitable for 4-poles (4P) configurations, and supports a rated current of 25A. The part has a net width of 4mm and is characterized by its dimensions: H4.1mm x W19.1mm x D19mm. It is designed to operate with a maximum voltage of 800V. The color of the part is light gray, indicating its power consumption category.

WAGO

2002-1392

Verified stock: 4

Wago 2002-1392 is an end plate designed for use with the TOPJOB S series, serving both end and intermediate plate functions. It features a rated impulse voltage (Uimp) of 0.8 mm and is constructed from Polyamide (PA) 66. The part is characterized by its dimensions, H59.5mm x W0.8mm x D33mm, and is presented in orange.

WAGO

2002-408

Verified stock: 9

Wago 2002-408 is an insulated push-in type comb-style jumper bar designed for use in the TOPJOB S series. It features an 8-way design, suitable for facilitating connections across 8 poles (8P) with a net width corresponding to the 8-pole configuration. This busbar is rated for a current of 25A and can withstand voltages up to 800V. Its dimensions are H4.1mm x W39.9mm x D19mm, ensuring it fits within standard configurations. The part is presented in light gray, aligning with typical industrial aesthetics and identification standards.

WAGO

2002-1301

Verified stock: 20

Wago 2002-1301 is a feed-through terminal block featuring push-in CAGE CLAMP spring connections. It supports a variety of rated currents including 24A (IEC), 32A (IEC), 20A (UL), 20A (CSA), 22A (Ex e II), and 20A (Ex e II with jumper). This 1-deck terminal block is designed with side and center marking slots, making it suitable for Ex e II applications. It has a net height of 8 kV for impulse voltage, a width accommodating 1 feed-through pole (1P), and is compatible with DIN-35 rail mounting. The terminal block is colored gray and measures H59.2mm x W5.2mm x D32.9mm. It accepts wire sizes from 0.25mm2 to 4mm2 for fine stranded or solid conductors and #22AWG to #12AWG for fine stranded or solid conductors, with a 2.5mm2 nominal cross-section. The material is Polyamide (PA) 66, and it includes 3-wire connections (1 push-in + 2 push-in) (1+2). The terminal block is rated for voltages up to 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II), and is part of the TOPJOB S series.

WAGO

2002-1407

Verified stock: 893

Wago 2002-1407 is a ground/earthing terminal block featuring push-in CAGE CLAMP spring connections. It is designed with a single deck/level, including side and center marking slots, and is suitable for Ex e II applications. This terminal block has a rated impulse voltage (Uimp) of 5.2 mm and a net width for 1 grounding / protective-earth (1PE). It is designed for mounting on DIN-35 rail (35 x 15 / 35 x 7.5) and exhibits a green-yellow color for easy identification. The dimensions are H69.9mm x W5.2mm x D32.9mm, accommodating 0.25mm2 to 4mm2 fine stranded or solid conductors and #22AWG to #12AWG fine stranded or solid conductors with a 2.5mm2 nominal cross-section. The terminal block is made from Polyamide (PA) 66 and supports 4-wires (2 push-in + 2 push-in) (2+2) connections. It is part of the TOPJOB S series.

WAGO

2002-2292

Verified stock: 911

Wago 2002-2292 is an end and intermediate plate designed for use with the TOPJOB S series. It features a rated impulse voltage (Uimp) of 0.8 mm and is constructed from Polyamide (PA) 66. The dimensions of this part are H69.7mm x W0.8mm x D51.7mm. Its color is orange, indicating its function and compatibility within the system.

WAGO

2002-1492

Verified stock: 1

Wago 2002-1492 is an end and intermediate plate designed for use with the TOPJOB S series. It features a rated impulse voltage (Uimp) of 0.8 mm and is constructed from Polyamide (PA) 66. The part is orange in color and has dimensions of H70mm x W0.8mm x D33mm.

WAGO

2002-2201

Verified stock: 1

Wago 2002-2201 is a feed-through terminal block featuring push-in CAGE CLAMP spring connections. It is designed with 2 decks/levels and is suitable for Ex e II applications. This terminal block supports a rated current of 24A (IEC), 28A (IEC), 20A (UL), 20A (CSA), 20A (Ex e II), and 18A (Ex e II with jumper). It has a net height of 6 kV for IEC standards and a rated impulse voltage (Uimp) of 5.2 mm. The net width accommodates 2 feed-through poles (2P), and it is designed for mounting on a DIN-35 rail. The terminal block is colored gray and has dimensions of H69.7mm x W5.2mm x D51.7mm. It is compatible with 0.25mm2 to 4mm2 fine stranded or solid conductors and #22AWG to #12AWG fine stranded or solid conductors, with a 2.5mm2 nominal cross-section. The material is Polyamide (PA) 66, and it includes 4-wires (2 push-in + 2 push-in) for connections. The terminal block supports a voltage of 500 V (IEC), 300 V (UL), 600 V (CSA), and 440 V (Ex e II), and is part of the TOPJOB S series.

WAGO

2002-404

Verified stock: 196

Wago 2002-404 is an insulated push-in type comb-style jumper bar designed for use in the TOPJOB S series. It features a 4-way design, suitable for 4-poles (4P) configurations, and supports a rated current of 25A. The part has a net width of 4mm and is characterized by its dimensions: H4.1mm x W19.1mm x D19mm. It is designed to operate with a maximum voltage of 800V. The color of the part is light gray, indicating its power consumption category.

WAGO

2002-1392

Verified stock: 4

Wago 2002-1392 is an end plate designed for use with the TOPJOB S series, serving both end and intermediate plate functions. It features a rated impulse voltage (Uimp) of 0.8 mm and is constructed from Polyamide (PA) 66. The part is characterized by its dimensions, H59.5mm x W0.8mm x D33mm, and is presented in orange.

WAGO

2002-408

Verified stock: 9

Wago 2002-408 is an insulated push-in type comb-style jumper bar designed for use in the TOPJOB S series. It features an 8-way design, suitable for facilitating connections across 8 poles (8P) with a net width corresponding to the 8-pole configuration. This busbar is rated for a current of 25A and can withstand voltages up to 800V. Its dimensions are H4.1mm x W39.9mm x D19mm, ensuring it fits within standard configurations. The part is presented in light gray, aligning with typical industrial aesthetics and identification standards.

WAGO

2002-1304 WAGO Industrial Automation Components

Part#:2002-1304

Manufacturer:WAGO

Product condition

2002-1304 Description

Relevant products

2002-1301

2002-1407

2002-2292

2002-1492

2002-2201

Recommended parts

XTOE1P6BCS

S203-K20

PV10BW

879EX-G1

RY2S-UDC24V