M2S 330-11Y-M20 Schmersal Electronic Components

Product Details

• Bounce duration, maximum
  43,221 ms
• Switchover time, maximum
  10 ms
• Note (Switching element)
  galvanically separated contact bridges
• Utilisation category AC-15
  230 VAC
• Switching element
  NO contact, NC contact
• Rated impulse withstand voltage Uimp
  4 kV
• Thermal test current
  6 A
• Restistance to shock
  50 g / 6 ms
• Rated insulation voltage Ui
  250 V
• Degree of protection
  IP65 to EN 60529
• Ambient temperature, minimum
  -30 °C
• Height of sensor
  120.5 mm
• Diameter of the Plunger
  8.5 mm
• Wire cross-section
  13 AWG
• Width of sensor
  40 mm
• Length of sensor
  40 mm
• Note (Cable section)
  All indications about the cable section are including the conductor ferrules.
• Cable section, minimum
  1.5 mm²
• Mechanical life, minimum
  30,000,000 Operations
• Terminal Connector
  Screw connection
Contact opening
2 x 0.5 mm
Actuating force, minimum
45 N
Actuating element
Plunger
Material of the contacts, electrical
Silver
Standards
EN 60947-5-1
Enclosure coating material
painted
Slide form
Sphere
Active principle
mechanical
Gross weight
190 g
Enclosure material
Light-alloy diecast, paint finish
Switching principle
Snap switch element
Ambient temperature, maximum
+90 °C
Cable section, maximum
2.5 mm²
Actuating speed, minimum
1 mm/min
Repeat accuracy of switching points
0.02
Number of shutters
1
Number of openers
1

M2S 330-11Y-M20 Related Documents