CSS 14-34F0-S-D-M-ST Schmersal Electronic Components

Product Details

• Degree of protection
  IP65 to EN 60529, IP67 to EN 60529
• Storage and transport temperature, maximum
  +85 °C
• Storage and transport temperature, minimum
  -25 °C
• Ambient temperature, maximum
  +70 °C
• Restistance to shock
  30 g / 11 ms
• Ambient temperature, minimum
  -25 °C
• Ensured switch distance OFF Sar
  13 mm, 17 mm
• Height of sensor
  108.2 mm
• Width of sensor
  27 mm
• Terminal Connector
  Connector plug M12, 8-pole
• Ensured switch distance ON Sao
  12 mm, 8 mm
• Switch distance
  10 mm, 14 mm
• Note
  The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current
• Actuator switch distance
  Actuator CST 180-1 / CST 180-2: 10 mm, Actuator CST 34-S-1: 14 mm, Actuator CST 34-S-2: 14 mm
• Repeat accuracy R R
  0.5 mm
• Number of Series-wiring of sensors
  31
• Hysteresis (Switch distance), maximum
  1.5 mm
• Actuating panels
  lateral
• Number of fail-safe digital outputs
  2
• Integral System Diagnostics, status
  Yes
Number of LEDs
3
Cascadable
Yes
Short-circuit recognition
Yes
Safety functions
Yes
Diagnostic output
Yes
Input for enabling pushbutton, suitable for automatic start
Yes
Duration of risk, maximum
60 ms
Active area
lateral
Sensor topology
Sensor for series wiring
Gross weight
142 g
Standards
IEC 60947-5-3
Reaction time, maximum
30 ms
Housing construction form
Block
Enclosure material
Glass-fibre, reinforced thermoplastic
Active principle
inductive
EMC rating
IEC 61000-6-2
Interfering radiation
IEC 61000-6-4
Current, Utilisation category DC13
0.05 A
Voltage, Utilisation category DC13
24 VDC
Rated operating current (safety outputs)
250 mA
Voltage, Utilisation category DC12
24 VDC
Current, Utilisation category DC12
0.05 A
Versions
p-type
Voltage drop Ud, maximum
5 V
Current leakage Ir
0.5 mA
Output current, (fail-safe output), maximum
0.25 A
Switching frequency, approx.
3 Hz
Operating current
600 mA
Voltage type
DC (direct current)
Required rated short-circuit current to EN 60947-5-1
100 A
No-load supply current I0
100 mA
Degree of pollution to VDE 0100
3
Rated insulation voltage Ui
32 VDC
Overvoltage category
III
Rated impulse withstand voltage Uimp
0.8 kV
Protection rating
II
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 1 mm
Length of sensor
35 mm
Note (Repeat accuracy R)
Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 36 mm (e.g. mounting tolerance or due to guard door sagging). Increased misalignment, max. 53 mm, possible when the CST 34-S-2 actuator is used. The axial m
Number of semi-conductor outputs with signaling function
1
Short circuit detection
Yes
Installation conditions (mechanical)
not flush

CSS 14-34F0-S-D-M-ST Related Documents