AZM201Z-I2-CC-T-1P2PW-A Schmersal Safety Switches

Product Details

• Current, Utilisation category DC13
  0.05 A
• Rated operating current (safety outputs)
  250 mA
• Voltage, Utilisation category DC13
  24 VDC
• Voltage drop Ud, maximum
  4 V
• Current leakage Ir
  0.5 mA
• Classification ZVEI CB24I, Source
  C2
• Classification ZVEI CB24I, Sink
  C1, C2
• Switching thresholds
  -3 V … 5 V (Low), 15 V … 30 V (High)
• No-load supply current I0
  50 mA
• Operating current
  50 mA
• Switching frequency, approx.
  1 Hz
• Current consumption with solenoid ON, peak
  700 mA / 100 ms
• Current consumption with solenoid ON, average
  200 mA
• Operating voltage, minimum
  20.4 VDC
• Operating voltage, maximum
  26.4 VDC
• Degree of pollution to VDE 0100
  3
• Overvoltage category
  III
• Rated impulse withstand voltage Uimp
  0.8 kV
• Rated insulation voltage Ui
  32 VDC
• Protection rating
  III
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Restistance to shock
30 g / 11 ms
Note (Relative humidity)
non-condensing
Relative humidity, minimum
30 %
Relative humidity, maximum
95 %
Storage and transport temperature, maximum
+85 °C
Storage and transport temperature, minimum
-25 °C
Ambient temperature, minimum
-25 °C
Degree of protection
IP66 to EN 60529, IP67 to EN 60529
Height of sensor
220 mm
Ambient temperature, maximum
+60 °C
Width of sensor
40 mm
Length of sensor
50 mm
Wire cross-section, maximum
15 AWG
Wire cross-section, minimum
23 AWG
Note (Cable section)
All indications about the cable section are including the conductor ferrules.
Cable section, maximum
1.5 mm²
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Gross weight
568.8 g
Cable section, minimum
0.25 mm²
Terminal Connector
Spring pulley connection
Actuating speed, maximum
0.2 m/s
Clamping force in accordance with ISO14119 Fzh
2,000 N
Latching force
30 N
Duration of risk, maximum
200 ms
Clamping force, maximum Fmax
2,600 N
Mechanical life, minimum
1,000,000 Operations
Number of safety contacts
2
Integral System Diagnostics, status
Yes
Safety functions
Yes
Enclosure material
Glass-fibre, reinforced thermoplastic
Series-wiring
Yes
Short-circuit recognition
Yes
general information
Individual coding, multiple teaching
Short circuit detection
Yes
Manual release
Yes
Power to lock
Yes
Guard locking monitored
Yes
Response time safety outputs in case of switch-off by safety inputs, maximum
0.5 ms
Time to readiness, maximum
4,000 ms
Active principle
RFID
Standards
EN ISO 13849-1, EN ISO 14119, IEC 60947-5-1
Coding level according to ISO 14119
High

Related documents AZM201Z-I2-CC-T-1P2PW-A Specs