Advantage Electric Supply Logo

XT40.722 Puls AC/DC Power Supplies

Puls XT40.722 PULS XT40.722 is a power supply unit part of the X-series, designed to function as an AC/DC PSU/converter with a semi-regulated 25% power reserve and a DC-OK relay contact output. It operates on a supply voltage of 3x432-528Vac (440Vac / 480Vac / 500Vac / 525Vac nominal; 47-63Hz), with a turn-on voltage of 3 x 390Vac and a shutdown voltage of 3 x 355Vac. The unit's dimensions are W96mm x H124mm x D159mm, and it is encased in an aluminium housing with screw-clamp connections for installation. It has a rated current of 13.3A at 72Vdc and is designed for DIN rail mounting in a 3-phase (3AC) network. The ambient air temperature for operation ranges from -25 to +70°C. The XT40.722 has a net width of 96 mm and a peak current consumption of 4A max. inrush at 3x480Vac input. Its rated power is 24W/+60°C...+70°C (derating) 960W at 72Vdc and 1200W for a typical 15s, with protection functions including output overvoltage protection (91.1Vdc max.), active input inrush current limiter, and overload/short-circuit current protection. It is not designed for series or parallel operation to increase output power but supports 1+1 redundancy for higher system availability. The unit is resistant to back-feeding loads up to 87.9V. It has an efficiency of 0.955 at 3x480Vac input, with a 350ms start-up delay, 40ms rise time at nominal input and full current load without load capacitance, and 70ms with 13.3mF load capacitance. The output voltage is fixed at 72Vdc with a 1.4V turn-ON overshoot, a hold time of 3.6ms at 3x480Vdc input, power dissipation/losses of 45.2W at full output load, an output stage capacitance of 4050µF, and a ripple of 3000mVpp at 20Hz...2KHz with a 50Ω load.
Puls

Part#:XT40.722

Manufacturer:Puls

Product Lifecycle:Active

Get a quick Quote!

PULS XT40.722 is a power supply unit part of the X-series, designed to function as an AC/DC PSU/converter with a semi-regulated 25% power reserve and a DC-OK relay contact output. It operates on a supply voltage of 3x432-528Vac (440Vac / 480Vac / 500Vac / 525Vac nominal; 47-63Hz), with a turn-on voltage of 3 x 390Vac and a shutdown voltage of 3 x 355Vac. The unit's dimensions are W96mm x H124mm x D159mm, and it is encased in an aluminium housing with screw-clamp connections for installation. It has a rated current of 13.3A at 72Vdc and is designed for DIN rail mounting in a 3-phase (3AC) network. The ambient air temperature for operation ranges from -25 to +70°C. The XT40.722 has a net width of 96 mm and a peak current consumption of 4A max. inrush at 3x480Vac input. Its rated power is 24W/+60°C...+70°C (derating) 960W at 72Vdc and 1200W for a typical 15s, with protection functions including output overvoltage protection (91.1Vdc max.), active input inrush current limiter, and overload/short-circuit current protection. It is not designed for series or parallel operation to increase output power but supports 1+1 redundancy for higher system availability. The unit is resistant to back-feeding loads up to 87.9V. It has an efficiency of 0.955 at 3x480Vac input, with a 350ms start-up delay, 40ms rise time at nominal input and full current load without load capacitance, and 70ms with 13.3mF load capacitance. The output voltage is fixed at 72Vdc with a 1.4V turn-ON overshoot, a hold time of 3.6ms at 3x480Vdc input, power dissipation/losses of 45.2W at full output load, an output stage capacitance of 4050µF, and a ripple of 3000mVpp at 20Hz...2KHz with a 50Ω load.

About the manufacturer: Puls is one of the manufacturers that offers AC/DC Power Supplies that you can order at Advantage Electric Supply site. Puls specializes in AC/DC power supplies, dedicating its efforts solely to the development of premium DIN rail power supplies. As a leading authority in power conversion, Puls distinguishes itself through focused engineering and an unwavering commitment to quality, positioning itself as the top leader in the field. This dedication ensures the highest standard in the industry, reflecting in every product they offer.

Check out the XT40.722 Puls price in the box on the right side or send a quick quote.

Product Details

  • UL File No.
    E198865
  • Width
    96 mm
  • Current Output
    13.3 A
  • Voltage Input
    480 VAC
  • Depth
    159 mm
  • Phase
    3 Phase
  • Power
    960 W
  • Efficiency
    95.5 %
  • Height
    124 mm
  • Current Input
    1.65 A
  • Voltage Output
    72 VDC

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Related documents XT40.722 Specs

XT40.722 Datasheet

Manufacturer warranty

$800.00

Request a quote, and we will send availability within minutes.

Select Qty:

$800.00

$800.00 each

Average response time: 11 minutes

Fast Shipping & Delivery

We deliver nationwide and international

Secure Payment Processing

with money back guarantee

Warranty On All Parts

Manufacturer warranty

Responsive Customer Support

Let us know how we can help!

Need more details?

Feel free to chat with us

Relevant products

XT40.482 Part Image. Manufactured by Puls.

XT40.482

$690.00

Verified stock: 2

PULS XT40.482 is a power supply unit part of the X-series, designed to function as an AC/DC PSU/converter with a semi-regulated 25% power reserve and a DC-OK relay contact output. It operates with a supply voltage of 3x432-528Vac (440Vac / 480Vac / 500Vac / 525Vac nominal; 47-63Hz), a turn-on voltage of 3 x 390Vac, and a shutdown voltage of 3 x 355Vac. The unit's dimensions are W96mm x H124mm x D159mm, and it is housed in an aluminium casing with screw-clamp connections for installation. It supports a rated current of 20A at 48Vdc and is designed for DIN rail mounting in a 3-phase (3AC) network. The XT40.482 can operate in ambient air temperatures ranging from -25 to +70°C. It has a peak inrush current consumption of 4A (at 3x480Vac input), a rated power of 960W at 48Vdc (1200W for typ. 15s), and includes protection functions such as output overvoltage protection (57.2Vdc max.) and overload/short-circuit current protection. The unit is not intended for parallel operation to increase output power but can be used in a 1+1 redundancy setup for higher system availability. It features an efficiency of 0.96 (at 3x480Vac input), a 350ms start-up delay, and a hold time of 3.1ms at 3x480Vdc input. Power dissipation losses are 40W at full output load, and it has an electrical durability of up to 15 years or 131400 hours at 25°C with a 20A output. The output stage capacitance is 7600µF, and the ripple is 2500mVpp (20Hz...2KHz; 50Ω).

Puls

ML100.105 Part Image. Manufactured by Puls.

ML100.105

$256.00

Verified stock: 0

PULS ML100.105 is a power supply unit (PSU) / converter designed for AC/DC applications with DIN rail mounting. It operates within an ambient air temperature range of -10 to +70°C and offers a rated current of 2.1A at 48Vdc, with a power derating from 2.5W at +60°C to +70°C. The unit features spring-clamp connections for secure and reliable connectivity. It supports a wide range of supply voltages, including AC inputs from 85Vac to 132Vac and 184Vac to 264Vac across various nominal values (100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, 240Vac) with auto-selection and a frequency range of 47-63Hz, as well as DC inputs from 213Vdc to 377Vdc (220Vdc, 250Vdc nominal). The ML100.105 measures 73mm in width, 75mm in height, and 103mm in depth, and is housed in a PC / ABS blend for durability. It is compatible with single-phase (1AC) or DC networks, has a net width of 73 mm, and provides a rated power of 100W. The output voltage is adjustable between 48Vdc and 56Vdc, achieving an efficiency of 0.91 with a 230Vac input. The unit's current consumption includes a maximum inrush of 22A at 120Vac input and 37A peak at 230Vac input. Power dissipation/losses are rated at 10W, and the ripple is specified at 50mVpp over a frequency range of 20Hz to 20MHz at 50Ω.

Puls

ML90.200 Part Image. Manufactured by Puls.

ML90.200

$278.00

Verified stock: 0

PULS ML90.200 is a power supply unit (PSU) / converter designed for AC/DC applications with DIN rail mounting. It operates within an ambient air temperature range of -10 to +70°C and adheres to NEC Class 2 design specifications. This unit offers a rated current of 3.75A at 24Vdc with a derating of 2W from +60°C to +70°C. It features spring-clamp connections for secure and efficient connectivity. The supply voltage accommodates a wide range from 323Vac to 576Vac, supporting various nominal voltages such as 380Vac, 400Vac, 415Vac, 440Vac, 480Vac, 500Vac, and 525Vac, with a frequency range of 47-63Hz and a 2-phase input. The dimensions of the ML90.200 are W72.5mm x H75mm x D103mm, constructed from a PC / ABS blend housing for durability. It is designed for a 2-phase AC network, with a net width of 72.5 mm. The rated power is 90W, and the output voltage is adjustable between 24Vdc and 28Vdc. Protection functions include an NTC for input inrush current limiting. The efficiency rates are 0.89 at 480Vac input and 0.895 at 400Vac input. Current consumption can reach up to 36A max inrush at 2x400Vac input and 45A peak max inrush at 2x480Vac input. Power dissipation/losses are calculated at 10.5 W, with a ripple of 50mVpp across a frequency range of 20Hz to 20MHz at 50Ω.

Puls

ML100.200 Part Image. Manufactured by Puls.

ML100.200

$276.00

Verified stock: 0

PULS ML100.200 is a power supply unit designed for AC/DC conversion with DIN rail mounting capabilities. It operates within an ambient air temperature range of -10 to +70°C and offers a rated current of 4.2A at 24Vdc, with a derating of 2.5W from +60°C to +70°C. The unit features spring-clamp connections for secure installation and supports a wide supply voltage range of 323Vac to 576Vac, accommodating various nominal voltages such as 380Vac, 400Vac, 415Vac, 440Vac, 480Vac, 500Vac, and 525Vac across a frequency range of 47-63Hz, suitable for 2-phase input networks. With dimensions of W72.5mm x H75mm x D103mm and constructed from a PC/ABS blend housing, the ML100.200 has a net width of 72.5 mm. It delivers a rated power of 100W and an adjustable output voltage range of 24Vdc to 28Vdc. The unit is equipped with an NTC for input inrush current limitation, achieving efficiencies of 0.895 and 0.89 at 400Vac and 480Vac inputs, respectively. It has a maximum inrush current consumption of 36A at 2x400Vac input and 45A peak at 2x480Vac input, with power dissipation/losses of 11.7W and a ripple of 50mVpp across a frequency range of 20Hz to 20MHz at 50Ω.

Puls

What can I help you find today?

Recommended parts