PILZ-773104 Pilz Electrical Safety Devices

Out if stock but available for backorder.

We're dedicated to getting your orders to you as fast as possible and offer different shipping options to make sure you get what you need on time.

We're fully committed to delivering quality you can trust. If something isn't quite right, you have 30 days to return it. And should a part be defective, our 1-year warranty ensures you're covered.

Pilz PILZ-773104 is a safety controller designed as a configurable safety base unit or safe small controller. It features airgap creepage distances of 3mm between relay contacts and 5.5mm between relay contacts and other circuits. The unit offers potential isolation with protective separation, having a rated surge voltage of 2500V between SC output and system voltage, and 6000V between relay output and system voltage. It supports DIN rail mounting (35mmx7.5mm; horizontal) and operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C. The controller has a net height of 94mm, a rated current of 6A for both 24Vdc (DC-1) and 240Vac (AC-1), and lower ratings for other specific conditions. Connection types include plug-in/detachable screw or spring-loaded terminals with specified stripping lengths. It falls under the base unit sub-range, measures 27mm in width, and offers an IP20 degree of protection. The supply voltage requirement is 20.4-28.8Vdc, with a nominal 24Vdc. The housing is made of PPO and ABS materials. It supports a maximum cable length of 1000m per input and 40km overall for test pulse output, with a net width of 135mm. Communication is facilitated via RS-232 protocol. The controller accommodates various cross-sections for wiring, has a power consumption of 192W under load and 8W at no load, and a net depth of 121mm. It can be stored in temperatures ranging from -25 to +70°C. The device includes multiple digital outputs for safety, auxiliary, and relay functions, along with 20 safety inputs. It features short-circuit proof protection and potential isolation, with specific response times for different functions. The rated impulse voltage is 6kV, with a rated insulation voltage of 250V. Current consumption is specified at 6A, with detailed time delays for switch-off, switch-on, supply interruption, input delay, and input pulse suppression, alongside processing times for cycle and self-test durations.