PILZ-773011W Pilz Automation Software Solutions

PILZ-773011W on Advantage Electric Supply
Pilz

Part#:PILZ-773011W

Manufacturer:Pilz

Product Lifecycle:Active

Get a quick Quote!

Pilz PILZ-773011W is a configurable safety base unit designed for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail. It operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with forced convection off. This safety controller features an expandable design with a net height of 94mm and offers various connection types, including plug-in/detachable screw or spring-loaded terminals with specified stripping lengths for different connection types. It supports a supply voltage range of 20.4-28.8Vdc (24Vdc nominal) and is constructed with a PPO bottom housing and an ABS front housing. The PILZ-773011W can accommodate a maximum cable length of 1000m per input and a total cable length of 40km for test pulse output. It has a net width of 135mm and communicates via the RS-232 protocol. The device is compatible with wire cross-sections ranging from 0.25 to 2.5mm2, depending on the connection type, and has a power consumption of 192W with an external power supply under load, 8W with no load, and 2.5W per expansion module. Its net depth is 121mm, and it can be stored in temperatures ranging from -25 to +70°C. The controller features 4 safety semiconductor outputs, 1 standard auxiliary semiconductor output, 2 safety relay outputs, 4 test pulse outputs, and 1 standard cascading output, all with specific current ratings. It includes protection functions such as short-circuit proofing, potential isolation, and galvanic isolation. The response time varies for different functions, with a maximum cycle time of 15ms and specific delays for switch-off, switch-on, supply interruption, input delay, and input pulse suppression. The rated impulse voltage is 6kV, and the rated insulation voltage is 250V. It supports 20 safety inputs and has a current consumption specification for a blow-out fuse or circuit breaker.

About the manufacturer: Pilz is one of the manufacturers that offers Automation Software Solutions that you can order at Advantage Electric Supply site. We are at the forefront of driving the evolution of industrial automation. Our company ethos is built on dedication and principles, placing a high priority on safety. Over the years, we have been devoted to creating cutting-edge products and solutions tailored to our customers' requirements.

Check out the PILZ-773011W Pilz price in the box on the right side or send a quick quote.

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.


PILZ-773011W Description

Pilz PILZ-773011W is a configurable safety base unit designed for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail. It operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with forced convection off. This safety controller features an expandable design with a net height of 94mm and offers various connection types, including plug-in/detachable screw or spring-loaded terminals with specified stripping lengths for different connection types. It supports a supply voltage range of 20.4-28.8Vdc (24Vdc nominal) and is constructed with a PPO bottom housing and an ABS front housing. The PILZ-773011W can accommodate a maximum cable length of 1000m per input and a total cable length of 40km for test pulse output. It has a net width of 135mm and communicates via the RS-232 protocol. The device is compatible with wire cross-sections ranging from 0.25 to 2.5mm2, depending on the connection type, and has a power consumption of 192W with an external power supply under load, 8W with no load, and 2.5W per expansion module. Its net depth is 121mm, and it can be stored in temperatures ranging from -25 to +70°C. The controller features 4 safety semiconductor outputs, 1 standard auxiliary semiconductor output, 2 safety relay outputs, 4 test pulse outputs, and 1 standard cascading output, all with specific current ratings. It includes protection functions such as short-circuit proofing, potential isolation, and galvanic isolation. The response time varies for different functions, with a maximum cycle time of 15ms and specific delays for switch-off, switch-on, supply interruption, input delay, and input pulse suppression. The rated impulse voltage is 6kV, and the rated insulation voltage is 250V. It supports 20 safety inputs and has a current consumption specification for a blow-out fuse or circuit breaker.


Manufacturer warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Fast Shipping & Delivery

We deliver nationwide and international


Secure Payment Processing

with money back guarantee


Warranty On All Parts

Manufacturer warranty


Responsive Customer Support

Let us know how we can help!


Need more details?

Feel free to chat with us

What can I help you find today?

Recommended parts