PILZ-772032 Pilz Logic Controllers & Displays

Pilz PILZ-772032 Pilz PILZ-772032 is a communications unit designed as an expansion/communication module with DeviceNet fieldbus interface, suitable for peripheral device types. It supports station addresses ranging from 0 to 63d and features potential isolation between the fieldbus and module voltage with functional insulation, rated at a surge voltage of 500V. This unit is designed for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail, and operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with forced convection off. The unit has a net height of 100 mm, a width of 22.5 mm, and a depth of 110 mm. Connection is facilitated through a 5-pin plug-in connector, offering plug-in/detachable screw or spring-loaded terminal connections, accommodating 2 points per spring-loaded connection with a 9mm stripping length. It falls under the communication module sub-range, with a degree of protection rated at IP20 and a supply voltage requirement of 19.2-30Vdc (24Vdc nominal). The housing is made of PC material. The communication protocol supported is DeviceNet, with wire cross-sections ranging from 0.25 to 2.5mm2 for various connection types. Power consumption is rated at 1.5 W for module supply and 0.75 W for DeviceNet. It can operate in ambient air temperatures for storage between -25 and +70°C. Protection functions include galvanic isolation and potential isolation, with a rated insulation voltage (Ui) of 30 V. The unit supports transmission rates of 125kBit/s, 250kBit/s, and 500kBit/s on DeviceNet, with a time delay of 20ms for supply interruption before de-energization.
Pilz

Part#:PILZ-772032

Manufacturer:Pilz

Product Lifecycle:Active

Get a quick Quote!

Pilz PILZ-772032 is a communications unit designed as an expansion/communication module with DeviceNet fieldbus interface, suitable for peripheral device types. It supports station addresses ranging from 0 to 63d and features potential isolation between the fieldbus and module voltage with functional insulation, rated at a surge voltage of 500V. This unit is designed for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail, and operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with forced convection off. The unit has a net height of 100 mm, a width of 22.5 mm, and a depth of 110 mm. Connection is facilitated through a 5-pin plug-in connector, offering plug-in/detachable screw or spring-loaded terminal connections, accommodating 2 points per spring-loaded connection with a 9mm stripping length. It falls under the communication module sub-range, with a degree of protection rated at IP20 and a supply voltage requirement of 19.2-30Vdc (24Vdc nominal). The housing is made of PC material. The communication protocol supported is DeviceNet, with wire cross-sections ranging from 0.25 to 2.5mm2 for various connection types. Power consumption is rated at 1.5 W for module supply and 0.75 W for DeviceNet. It can operate in ambient air temperatures for storage between -25 and +70°C. Protection functions include galvanic isolation and potential isolation, with a rated insulation voltage (Ui) of 30 V. The unit supports transmission rates of 125kBit/s, 250kBit/s, and 500kBit/s on DeviceNet, with a time delay of 20ms for supply interruption before de-energization.

About the manufacturer: Pilz is one of the manufacturers that offers Logic Controllers & Displays that you can order at Advantage Electric Supply site. We are at the forefront of driving the evolution of industrial automation. Our company ethos is built on dedication and principles, placing a high priority on safety. Over the years, we have been devoted to creating cutting-edge products and solutions tailored to our customers' requirements.

Check out the PILZ-772032 Pilz price in the box on the right side or send a quick quote.

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.


PILZ-772032 Description

Pilz PILZ-772032 is a communications unit designed as an expansion/communication module with DeviceNet fieldbus interface, suitable for peripheral device types. It supports station addresses ranging from 0 to 63d and features potential isolation between the fieldbus and module voltage with functional insulation, rated at a surge voltage of 500V. This unit is designed for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail, and operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with forced convection off. The unit has a net height of 100 mm, a width of 22.5 mm, and a depth of 110 mm. Connection is facilitated through a 5-pin plug-in connector, offering plug-in/detachable screw or spring-loaded terminal connections, accommodating 2 points per spring-loaded connection with a 9mm stripping length. It falls under the communication module sub-range, with a degree of protection rated at IP20 and a supply voltage requirement of 19.2-30Vdc (24Vdc nominal). The housing is made of PC material. The communication protocol supported is DeviceNet, with wire cross-sections ranging from 0.25 to 2.5mm2 for various connection types. Power consumption is rated at 1.5 W for module supply and 0.75 W for DeviceNet. It can operate in ambient air temperatures for storage between -25 and +70°C. Protection functions include galvanic isolation and potential isolation, with a rated insulation voltage (Ui) of 30 V. The unit supports transmission rates of 125kBit/s, 250kBit/s, and 500kBit/s on DeviceNet, with a time delay of 20ms for supply interruption before de-energization.


Manufacturer warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Fast Shipping & Delivery

We deliver nationwide and international


Secure Payment Processing

with money back guarantee


Warranty On All Parts

Manufacturer warranty


Responsive Customer Support

Let us know how we can help!


Need more details?

Feel free to chat with us

What can I help you find today?

Recommended parts

CP20.241

CP20.241

PULS CP20.241 is a DIN rail mounting power supply unit with an aluminium housing. It operates within an ambient air temperature range of -25 to +70°C and has a net width of 48 mm. The unit features a current consumption of 5.5A peak max. inrush at 230Vac input and 12A peak max. inrush at 120Vac input. Its efficiency rates are 0.956 at 230Vac input, 0.942 at 120Vac input, and 0.936 at 100Vac input. The dimensions of the CP20.241 are W48mm x H124mm x D127mm. It has a 450ms start-up delay for 100-230Vac input, with rise times of 145ms and 160ms under nominal input conditions with 0mF and 20mF load capacitance, respectively. Protection functions include output overvoltage protection and overload/short-circuit protection, with the capability for series or parallel operation for increased output voltages or power. The unit is resistant to back-feeding loads up to 35V. Power dissipation/losses are 22.1 W at 230Vac input and 29.6 W at 120Vac input, with an output stage capacitance of 8500 µF. Electrical durability varies with conditions, offering up to 488000 hours of operation. The ripple is 50mVpp (20Hz...20MHz; 50Ω). This AC/DC power supply unit is part of the CP-series, designed with ATEX approval and a 20% power reserve, featuring a DC-OK relay contact output and screw-clamp connections. It supports a supply voltage range of 88Vdc-180Vdc and 85Vac-264Vac, with a rated current of 20A at 24Vdc, and provides a rated power of 480W. The output voltage is adjustable between 24Vdc and 28Vdc, with a 500mV turn-ON overshoot and a hold time of 32ms at 120/230Vac input.

Puls

1