PILZ-400450 Pilz Emergency Stop Push Buttons

Out if stock but available for backorder.

We're dedicated to getting your orders to you as fast as possible and offer different shipping options to make sure you get what you need on time.

We're fully committed to delivering quality you can trust. If something isn't quite right, you have 30 days to return it. And should a part be defective, our 1-year warranty ensures you're covered.

Pilz PILZ-400450 is an emergency push-button designed for wall mounting with a small, non-modular button set suitable for rail mounting. It features an E-stop push-button and a contact block set, operating within an ambient air temperature range of -25 to +55°C. The unit has a net height of 51 mm, a 28mm head diameter, and a 22.3mm installation diameter. It supports a rated current of 2A at 24Vdc (DC-13), 3A at 250Vac (AC-15), with a minimum contact current of 1mA and a thermal current (Ith) of 5A. The connection is made via spring-loaded terminal connections. This device offers an IP65 degree of protection and has a round, red button made from AgNi contact material. The net width and depth are 42 mm and 108 mm, respectively. It features a rotational release type operating mode (turn left/right) and can be stored in temperatures ranging from -25 to +80°C. The PILZ-400450 has no Normally Open (NO) auxiliary contacts, includes 2 Normally Closed (NC) auxiliary contacts, a response time of 10ms / 0.01 s, a rated insulation voltage (Ui) of 250 V, and is capable of 50,000 operations at no load for mechanical durability.