RSS260-ST-AS Schmersal Safety Switches

Product Details

• Note (AS-i Input module address)
  Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
• AS-i Parameter bits, P3
  Internal device error (FID)
• AS-i Input module address
  0
• Note (AS-i Parameter bits)
  Set the parameter outputs to "1111" (0xF), FID: periphery error
• AS-i Parameter bits, P2
  No function
• AS-i Parameter bits, P1
  Enabling inhibit (tamper protection time) active (FID))
• AS-i Input, Channel 1
  Data bits DI 0 / DI 1 = dynamic code transmission
• AS-i Parameter bits, P0
  Actuator in
• AS-i Outputs, DO 0 … DO 3
  No Function
• AS-i, ID-Code2
  0xE
• AS-i Input, Channel 2
  Data bits DI 2 / DI 3 = dynamic code transmission
• AS-i, ID-Code
  0xB
• AS-i, ID-Code1
  0xF
• AS-i, IO-Code
  0x0
• AS-i Profile
  S-0.B.F.E
• AS-i Version
  V 2.1
• AS-i Specification
  Safety-Slave
• AS-i Current consumption, maximum
  100 mA
• AS-i Operating voltage, minimum
  18 VDC
• Note (AS-i Operating voltage)
  Protection against polarity reversal
AS-i Operating voltage AS-i maximum
31.6 VDC
Switching frequency, maximum
1 Hz
Overvoltage category
III
Degree of pollution to VDE 0100
3
Restistance to shock
30 g / 11 ms
Rated impulse withstand voltage Uimp
0.8 kV
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 1 mm
Ambient temperature, minimum
-25 °C
Rated insulation voltage Ui
32 VDC
Protection rating
III
Storage and transport temperature, maximum
+85 °C
Storage and transport temperature, minimum
-25 °C
Ambient temperature, maximum
+60 °C
Degree of protection
IP65 to EN 60529, IP67 to EN 60529
Ensured switch distance OFF Sar, lateral
15 mm
Width of sensor
40 mm
Height of sensor
29.5 mm
Ensured switching distance ON, side
6 mm
Terminal Connector
Connector M8, 4-pole, A-coded
Length of sensor
18 mm
Switch distance Sn
12 mm, 9 mm (in case of approach from side)
Ensured switching distance OFF, front
18 mm
Ensured switching distance ON, front
10 mm
Number of actuating directions
2
Integral System Diagnostics, status
Yes
Coding
Yes
Hysteresis (Switch distance), maximum
2 mm
Repeat accuracy R R
0.5 mm
Safety functions
Yes
Standards
IEC 61508, IEC 60947-5-3, EN ISO 14119
Enclosure material
Thermoplastic hotmelt
Active principle
RFID
Reaction time, maximum
100 ms
general information
Universal coding
Coding level according to ISO 14119
Low
Duration of risk, maximum
200 ms
Time to readiness, maximum
2,000 ms
Gross weight
60 g

Related documents RSS260-ST-AS Specs