AZS 2305.2 230 VAC Schmersal Safety Switches

Product Details

• EMC rating
  EMC-Directive
• Voltage, Utilisation category DC12
  24 VDC
• Input signal, LOW Signal 0
  0 … 2 VDC
• Switching capacity, maximum
  24 VDC
• Pull-in delay at automatic start, maximum, typically
  100 ms
• Rated AC voltage for controls, 60 Hz, minimum
  20.4 VAC
• Conduction resistance, maximum
  40 Ω
• Current, Utilisation category DC12
  0.1 A
• Input signal, HIGH Signal 1
  10 … 30 VDC
• Current, Utilisation category DC13
  2 A
• Switching capacity, minimum
  10 mA
• Voltage, Utilisation category DC13
  24 VDC
• Current, Utilisation category AC-15
  2 A
• Pull-in delay at RESET, typically
  20 ms
• Voltage, Utilisation category AC15
  250 VAC
• Drop-out delay in case of emergency, typically
  20 ms
• Note (Contact resistance)
  in new state
• Drop-out delay in case of power failure, typically
  80 ms
• Contact resistance, maximum
  0.1 Ω
• Rated AC voltage for controls, 50 Hz, minimum
  20.4 VAC
Electrical power consumption
5 W
Rated control voltage at AC 50 Hz, maximum
26.4 VAC
Rated control voltage at AC 60 Hz, maximum
26.4 VAC
Rated operating voltage
230 VAC
Frequency range
50 Hz, 60 Hz
Overvoltage category
III
Degree of pollution to VDE 0110
2
Storage and transport temperature, minimum
-25 °C
Rated impulse withstand voltage Uimp
4 kV
Resistance to vibrations to EN 60068-2-6
10 ... 55 Hz, Amplitude 0.35 mm
Restistance to shock
30 g / 11 ms
Ambient temperature, maximum
+55 °C
Storage and transport temperature, maximum
+70 °C
Degree of protection of clips or terminals
IP20
Degree of protection of the mounting space
IP54
Ambient temperature, minimum
+0 °C
Degree of protection of the enclosure
IP40
Width
55 mm
Tightening torque of Clips
0.4 Nm
Height
75 mm
Depth
110 mm
Note (Cable section)
All indications about the cable section are including the conductor ferrules.
Mounting
Snaps onto standard DIN rail to EN 60715
Number of signalling outputs
2
Cable section, maximum
4 mm²
Number of undelayed semi-conductor outputs with signaling function
2
Number of shutters
1
Number of openers
1
Terminal Connector
Screw connection, rigid or flexible
Number of safety contacts
3
Number of LEDs
1
Standards
IEC/EN 60204-1, BG-GS-ET-20, EN ISO 13849-1
Short-circuit recognition
Yes
Reset after disconnection of supply voltage
Yes
Gross weight
450 g
Integral System Diagnostics, status
Yes
Automatic reset function
Yes
Earth connection detection
Yes
Enclosure material
Glass-fibre, reinforced thermoplastic
Wire breakage detection
Yes

Related documents AZS 2305.2 230 VAC Specs