AZM300B-I1-ST-1P2P-A TEST BA Schmersal Safety Switches

Product Details

• Current, Utilisation category DC13
  0.05 A
• Classification ZVEI CB24I, Sink
  C1, C2
• Test pulse duration, maximum
  0.5 ms
• Voltage, Utilisation category DC13
  24 VDC
• Voltage, Utilisation category DC12
  24 VDC
• Voltage drop Ud, maximum
  4 V
• Versions
  short-circuit proof, p-type
• Classification ZVEI CB24I, Source
  C2
• Test pulse interval, minimum
  100 ms
• Duty cycle solenoid
  100 %
• Current consumption at 24V
  5 mA
• Switching frequency, maximum
  0.5 Hz
• No-load supply current I0
  100 mA
• Operating voltage, minimum
  20.4 VDC
• Operating voltage, maximum
  26.4 VDC
• Current consumption with solenoid ON, peak
  350 mA / 200 ms
• Degree of pollution to IEC/EN 60664-1
  3
• Resistance to vibrations to EN 60068-2-6
  10 … 150 Hz, amplitude 0.35 mm
• Relative humidity, maximum
  93 %
• Restistance to shock
  30 g / 11 ms
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Operating current
50 mA
Test pulse interval, typical
1000 ms
Current leakage Ir
0.5 mA
Current, Utilisation category DC12
0.05 A
Switching thresholds
−3 V … 5 V (Low), 15 V … 30 V (High)
External wiring and device fuse rating
2 A gG
Required rated short-circuit current to EN 60947-5-1
100 A
Current consumption with solenoid ON, average
200 mA
Notes (Power supply, general)
stabilised PELV power supply
Rated impulse withstand voltage Uimp
0.8 kV
Overvoltage category
III
Rated insulation voltage Ui
32 VDC
Zulässige Aufstellhöhe über NN, maximum
2,000 m
Protection rating
III
Ambient temperature, minimum
+0 °C
Note (Relative humidity)
non-condensing, non-icing
Storage and transport temperature, maximum
+90 °C
Ambient temperature, maximum
+60 °C
Storage and transport temperature, minimum
-10 °C
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
Length of sensor chain, maximum
200 m
Terminal Connector
Connector M12, 8-pole, A-coded
Ensured switch distance OFF Sar
20 mm
Ensured switch distance ON Sao
1 mm
Switch distance
2 mm
Tightening torque for the fixing screws, maximum
7 Nm
Type of the fixing screws
2x M6
Tightening torque of the fixing screws, minimum
6 Nm
Clamping force, maximum Fmax
1,500 N
Latching force, adjustable, position 1
25 N
Latching force, adjustable, position 2
50 N
Clamping force in accordance with ISO14119 Fzh
1,150 N
Angular offset between interlocking device and actuator, maximum
2 °
Note (Mechanical lifetime)
When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
Integral System Diagnostics, status
Yes
Mechanical life, minimum
1,000,000 Operations
Number of safety contacts
2
Safety functions
Yes
Series-wiring
Yes
Short circuit detection
Yes
Manual release
Yes
Short-circuit recognition
Yes
Latching
Yes
Actuator monitored
Yes
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Power to lock
Yes
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Duration of risk, maximum
200 ms
Gross weight
550 g
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Frequency band RFID
125 kHz
Active principle
RFID
general information
Individual coding
Standards
EN ISO 13849-1, EN ISO 14119, IEC 60947-5-3
Time to readiness, maximum
5,000 ms
Transmit power, maximum
-6 dB/m
Coding level according to ISO 14119
High

Related documents AZM300B-I1-ST-1P2P-A TEST BA Specs