AZM201BZ-ST-T-AS-P Schmersal Safety Switches

Product Details

• Operating current
  500 mA
• Rated operating voltage
  24 VDC -15% / +10% (stabilised PELV)
• Note (AS-i Parameter bits)
  FID: periphery error
• Note (AS-i Input module address)
  Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
• AS-i Input module address
  0
• AS-i Parameter bits, P3
  Internal device error (FID)
• AS-i Parameter bits, P0
  Safety guard and actuator detected
• AS-i Outputs, DO 3
  No Function
• AS-i Parameter bits, P2
  Magnet voltage in tolerance range
• AS-i Outputs, DO 2
  No Function
• AS-i Parameter bits, P1
  Solenoid interlock locked
• AS-i Input, Channel 2
  Data bits DI 2 / DI 3 = dynamic code transmission
• AS-i Outputs, DO 1
  No Function
• AS-i Outputs, DO 0
  Solenoid control
• AS-i, ID-Code1
  0xF
• AS-i Input, Channel 1
  Data bits DI 0 / DI 1 = dynamic code transmission
• AS-i, ID-Code2
  0xE
• AS-i Profile
  S-7.B.F.E
• AS-i, IO-Code
  0x7
• AS-i, ID-Code
  0xB
AS-i Version
V 3.0
AS-i Operating voltage, minimum
26.5 VDC
AS-i Specification
Safety-Slave
AS-i Current consumption, maximum
100 mA
AS-i Operating voltage AS-i maximum
31.6 VDC
Note (AS-i Operating voltage)
Protection against polarity reversal
Switching frequency, maximum
1 Hz
Overvoltage category
III
Degree of pollution to IEC/EN 60664-1
3
Rated impulse withstand voltage Uimp
0.8 kV
Rated insulation voltage Ui
32 VDC
Protection rating
III
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Storage and transport temperature, maximum
+85 °C
Relative humidity, minimum
10 %
Restistance to shock
30 g / 11 ms
Storage and transport temperature, minimum
-25 °C
Relative humidity, maximum
95 %
Tightening torque for the fixing screws, maximum
8 Nm
Terminal Connector
Connector plug M12, 4-pole, (A-coding)
Ambient temperature, minimum
-25 °C
Actuating speed, maximum
0.2 m/s
Ambient temperature, maximum
+60 °C
Note (Relative humidity)
non-condensing, non-icing
Length of sensor
50 mm
Height of sensor
220 mm
Degree of protection
IP66 to EN 60529, IP67 to EN 60529
Latching force
30 N
Width of sensor
40 mm
Clamping force, maximum Fmax
2,600 N
Clamping force in accordance with ISO14119 Fzh
2,000 N
Mechanical life, minimum
1,000,000 Operations
Number of actuating directions
2
Manual release
Yes
Safety functions
Yes
Latching
Yes
Actuator and interlock combined monitored
Yes
Reaction time, maximum
100 ms
Integral System Diagnostics, status
Yes
Power to unlock
Yes
Time to readiness, maximum
4,000 ms
general information
Universal coding
Coding level according to ISO 14119
Low
Duration of risk, maximum
200 ms
Standards
EN ISO 13849-1, IEC 61508, IEC 60947-5-3
Gross weight
541 g
Active principle
RFID
Enclosure material
Glass-fibre, reinforced thermoplastic

Related documents AZM201BZ-ST-T-AS-P Specs