AZM201B-SK-T-1P2PW Schmersal Safety Switches

Product Details

• Current, Utilisation category DC13
  0.05 A
• Voltage, Utilisation category DC13
  24 VDC
• Current leakage Ir
  0.5 mA
• Rated operating current (safety outputs)
  250 mA
• Voltage drop Ud, maximum
  4 V
• Classification ZVEI CB24I, Sink
  C1, C2
• Classification ZVEI CB24I, Source
  C2
• Switching thresholds
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Switching frequency, approx.
  1 Hz
• Operating current
  50 mA
• Current consumption with solenoid ON, peak
  700 mA / 100 ms
• Current consumption with solenoid ON, average
  200 mA
• Operating voltage, maximum
  26.4 VDC
• Degree of pollution to VDE 0100
  3
• No-load supply current I0
  50 mA
• Rated impulse withstand voltage Uimp
  0.8 kV
• Operating voltage, minimum
  20.4 VDC
• Overvoltage category
  III
• Restistance to shock
  30 g / 11 ms
• Rated insulation voltage Ui
  32 VDC
Protection rating
III
Note (Relative humidity)
non-condensing
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Relative humidity, maximum
95 %
Storage and transport temperature, minimum
-25 °C
Ambient temperature, maximum
+60 °C
Storage and transport temperature, maximum
+85 °C
Relative humidity, minimum
30 %
Ambient temperature, minimum
-25 °C
Wire cross-section, minimum
23 AWG
Degree of protection
IP66 to EN 60529, IP67 to EN 60529
Width of sensor
40 mm
Height of sensor
220 mm
Length of sensor
50 mm
Wire cross-section, maximum
15 AWG
Note (Cable section)
All indications about the cable section are including the conductor ferrules.
Actuating speed, maximum
0.2 m/s
Cable section, minimum
0.25 mm²
Cable section, maximum
1.5 mm²
Terminal Connector
Screw connection
Latching force
30 N
Mechanical life, minimum
1,000,000 Operations
Clamping force in accordance with ISO14119 Fzh
2,000 N
Clamping force, maximum Fmax
2,600 N
Number of safety contacts
2
Integral System Diagnostics, status
Yes
Safety functions
Yes
Series-wiring
Yes
Short-circuit recognition
Yes
Short circuit detection
Yes
Manual release
Yes
Actuator monitored
Yes
Power to unlock
Yes
Duration of risk, maximum
200 ms
Response time safety outputs in case of switch-off by safety inputs, maximum
0.5 ms
Enclosure material
Glass-fibre, reinforced thermoplastic
Coding level according to ISO 14119
Low
Active principle
RFID
Standards
IEC 60947-5-1, EN ISO 13849-1, IEC 61508
Gross weight
586 g
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Time to readiness, maximum
4,000 ms
general information
Universal coding

Related documents AZM201B-SK-T-1P2PW Specs