AZM201B-I1-ST-T-AS-P Schmersal Safety Switch Interlocks

Product Details

• Operating current
  500 mA
• Rated operating voltage
  24 VDC -15% / +10% (stabilised PELV)
• Note (AS-i Input module address)
  Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
• Note (AS-i Parameter bits)
  FID: periphery error
• AS-i Input module address
  0
• AS-i Parameter bits, P3
  Internal device error (FID)
• AS-i Parameter bits, P2
  Magnet voltage in tolerance range
• AS-i Parameter bits, P1
  Solenoid interlock locked
• AS-i Outputs, DO 3
  No Function
• AS-i Parameter bits, P0
  Safety guard and actuator detected
• AS-i Outputs, DO 0
  Solenoid control
• AS-i Outputs, DO 2
  No Function
• AS-i Input, Channel 1
  Data bits DI 0 / DI 1 = dynamic code transmission
• AS-i Outputs, DO 1
  No Function
• AS-i Input, Channel 2
  Data bits DI 2 / DI 3 = dynamic code transmission
• AS-i, ID-Code1
  0xF
• AS-i, ID-Code2
  0xE
• AS-i, IO-Code
  0x7
• AS-i Profile
  S-7.B.F.E
• AS-i, ID-Code
  0xB
AS-i Specification
Safety-Slave
AS-i Version
V 3.0
AS-i Current consumption, maximum
100 mA
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i Operating voltage, minimum
26.5 VDC
AS-i Operating voltage AS-i maximum
31.6 VDC
Switching frequency, maximum
1 Hz
Degree of pollution to IEC/EN 60664-1
3
Rated insulation voltage Ui
32 VDC
Rated impulse withstand voltage Uimp
0.8 kV
Overvoltage category
III
Protection rating
III
Restistance to shock
30 g / 11 ms
Relative humidity, maximum
95 %
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Note (Relative humidity)
non-condensing, non-icing
Storage and transport temperature, maximum
+85 °C
Relative humidity, minimum
10 %
Ambient temperature, minimum
-25 °C
Ambient temperature, maximum
+60 °C
Storage and transport temperature, minimum
-25 °C
Height of sensor
220 mm
Terminal Connector
Connector plug M12, 4-pole, (A-coding)
Tightening torque for the fixing screws, maximum
8 Nm
Actuating speed, maximum
0.2 m/s
Degree of protection
IP66 to EN 60529, IP67 to EN 60529
Width of sensor
40 mm
Length of sensor
50 mm
Clamping force, maximum Fmax
2,600 N
Latching force
30 N
Clamping force in accordance with ISO14119 Fzh
2,000 N
Number of actuating directions
2
Mechanical life, minimum
1,000,000 Operations
Integral System Diagnostics, status
Yes
Safety functions
Yes
Manual release
Yes
Latching
Yes
Actuator monitored
Yes
Power to unlock
Yes
general information
Individual coding
Duration of risk, maximum
200 ms
Standards
EN ISO 13849-1, IEC 61508, IEC 60947-5-3
Coding level according to ISO 14119
High
Enclosure material
Glass-fibre, reinforced thermoplastic
Time to readiness, maximum
4,000 ms
Reaction time, maximum
100 ms
Gross weight
541.3 g
Active principle
RFID

Related documents AZM201B-I1-ST-T-AS-P Specs