AZM 200ST1-T-1P2PWA Schmersal Safety Switch Interlocks

Product Details

• Current, Utilisation category DC13
  0.05 A
• Current leakage Ir
  0.5 mA
• Voltage, Utilisation category DC13
  24 VDC
• Switching frequency, approx.
  1 Hz
• Voltage drop Ud, maximum
  4 V
• Operating voltage, maximum
  26.4 VDC
• Operating current
  50 mA
• Switching thresholds
  -3 V … 5 V (Low), 15 V … 30 V (High)
• Rated operating current (safety outputs)
  250 mA
• No-load supply current I0
  600 mA
• Operating voltage, minimum
  20.4 VDC
• Overvoltage category
  III
• Degree of pollution to VDE 0100
  3
• Rated impulse withstand voltage Uimp
  0.8 kV
• Protection rating
  II
• Restistance to shock
  30 g / 11 ms
• Resistance to vibrations to EN 60068-2-6
  10 … 55 Hz, amplitude 1 mm
• Rated insulation voltage Ui
  32 VDC
• Note (Relative humidity)
  non-condensing
• Relative humidity, maximum
  95 %
Relative humidity, minimum
30 %
Ambient temperature, minimum
-25 °C
Storage and transport temperature, maximum
+85 °C
Ambient temperature, maximum
+50 °C
Width of sensor
40 mm
Storage and transport temperature, minimum
-25 °C
Terminal Connector
Connector M23, 8+1-pole
Height of sensor
220 mm
Degree of protection
IP67 to EN 60529
Length of sensor
50 mm
Actuating speed, maximum
0.2 m/s
Number of safety contacts
2
Latching force
30 N
Clamping force, maximum Fmax
2,600 N
Safety functions
Yes
Clamping force in accordance with ISO14119 Fzh
2,000 N
Mechanical life, minimum
1,000,000 Operations
Series-wiring
Yes
Integral System Diagnostics, status
Yes
Short-circuit recognition
Yes
Short circuit detection
Yes
Reaction time, maximum
60 ms
Guard locking monitored
Yes
Manual release
Yes
Active principle
inductive
Duration of risk, maximum
120 ms
Gross weight
586 g
Time to readiness, maximum
4,000 ms
Enclosure material
Glass-fibre, reinforced thermoplastic
Standards
IEC 61508, EN 60947-5-1, EN ISO 13849-1
Power to lock
Yes

Related documents AZM 200ST1-T-1P2PWA Specs