AZM 200 B ST-T-AS AP Schmersal Safety Switches

Product Details

• Operating current
  500 mA
• Note (AS-i Input module address)
  Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
• Rated operating voltage
  24 VDC -15% / +10% (stabilised PELV)
• AS-i Input module address
  0
• Note (AS-i Parameter bits)
  Set the parameter outputs to "1111" (0xF), FID: periphery error
• AS-i Outputs, DO 0
  Solenoid control
• AS-i Outputs, DO 1
  No Function
• AS-i Outputs, DO 3
  No Function
• AS-i Parameter bits, P3
  Error
• AS-i Outputs, DO 2
  No Function
• AS-i Parameter bits, P2
  Magnet voltage in tolerance range
• AS-i, ID-Code1
  0xF
• AS-i Input, Channel 1
  Data bits DI 0 / DI 1 = dynamic code transmission
• AS-i Input, Channel 2
  Data bits DI 2 / DI 3 = dynamic code transmission
• AS-i, ID-Code
  0xB
• AS-i Parameter bits, P1
  Solenoid interlock locked
• AS-i Parameter bits, P0
  Safety guard and actuator detected
• AS-i, ID-Code2
  0xE
• AS-i, IO-Code
  0x7
• AS-i Profile
  S-7.B.F.E
AS-i Version
V 2.1
AS-i Specification
Safety-Slave
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i Operating voltage AS-i maximum
31.6 VDC
Degree of pollution to VDE 0100
3
AS-i Operating voltage, minimum
26.5 VDC
AS-i Current consumption, maximum
100 mA
Overvoltage category
III
Rated impulse withstand voltage Uimp
0.8 kV
Rated insulation voltage Ui
32 VDC
Protection rating
II
Restistance to shock
30 g / 11 ms
Note (Relative humidity)
non-condensing
Resistance to vibrations to EN 60068-2-6
10 Hz ... 150 Hz, amplitude 0.35 mm
Relative humidity, maximum
95 %
Storage and transport temperature, minimum
-25 °C
Storage and transport temperature, maximum
+85 °C
Relative humidity, minimum
30 %
Ambient temperature, minimum
-25 °C
Ambient temperature, maximum
+60 °C
Height of sensor
244 mm
Width of sensor
40 mm
Degree of protection
IP67 to EN 60529
Length of sensor
50 mm
Actuating speed, maximum
2 m/s
Terminal Connector
Connector plug M12, 4-pole, (A-coding)
Tightening torque of the screw, maximum
1 Nm
Latching force
30 N
Integral System Diagnostics, status
Yes
Mechanical life, minimum
1,000,000 Operations
Number of actuating directions
1
Clamping force
2,000 N
Actuator monitored
Yes
Duration of risk, maximum
120 ms
Active principle
electromechanical
Power to lock
Yes
Coding level according to ISO 14119
Low
Time to readiness, maximum
4,000 ms
Reaction time, maximum
60 ms
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Standards
IEC 61508, IEC 60947-5-3, EN 60947-5-1
Gross weight
550 g
general information
Universal coding

Related documents AZM 200 B ST-T-AS AP Specs