AZ201CC-T-1P2P Schmersal Safety Switches


Part#:AZ201CC-T-1P2P
Alt. Part#:103015814
Manufacturer:Schmersal
Category:Safety Switches
Product Lifecycle:Active
Product description
AZ201CC-T-1P2P Schmersal - Safety switch with separate actuator; Thermoplastic enclosure; RFID-technology for needs-based protection against tampering; Max. length of the sensor chain 200 m; Self-monitoring series-wiring; 3 LEDs to show operating conditions; Sensor technology permi
Product Details
- Current, Utilisation category DC13 0.05 A
- Voltage, Utilisation category DC13 24 VDC
- Switching thresholds −3 V … 5 V (Low), 15 V … 30 V (High)
- Voltage drop Ud, maximum 4 V
- Classification ZVEI CB24I, Sink C1, C2
- Rated operating current (safety outputs) 250 mA
- Classification ZVEI CB24I, Source C2
- Current leakage Ir 0.5 mA
- Switching frequency, approx. 1 Hz
- Operating current 50 mA
- No-load supply current I0 100 mA
- Overvoltage category III
- Operating voltage, maximum 26.4 VDC
- Rated impulse withstand voltage Uimp 0.8 kV
- Operating voltage, minimum 20.4 VDC
- Degree of pollution to VDE 0100 3
- Rated insulation voltage Ui 32 VDC
- Restistance to shock 30 g / 11 ms
- Protection rating III
- Resistance to vibrations to EN 60068-2-6 10 … 150 Hz, amplitude 0.35 mm
- Note (Relative humidity) non-condensing
- Relative humidity, maximum 95 %
- Relative humidity, minimum 30 %
- Storage and transport temperature, maximum +85 °C
- Storage and transport temperature, minimum -25 °C
- Ambient temperature, maximum +70 °C
- Degree of protection IP66 to EN 60529, IP67 to EN 60529
- Ambient temperature, minimum -25 °C
- Wire cross-section, minimum 23 AWG
- Height of sensor 220 mm
- Width of sensor 40 mm
- Length of sensor 50 mm
- Wire cross-section, maximum 15 AWG
- Cable section, minimum 0.25 mm²
- Terminal Connector Spring pulley connection
- Note (Cable section) All indications about the cable section are including the conductor ferrules.
- Cable section, maximum 1.5 mm²
- Series-wiring Yes
- Number of safety contacts 2
- Actuating speed, maximum 0.2 m/s
- Latching force 30 N
- Integral System Diagnostics, status Yes
- Mechanical life, minimum 1,000,000 Operations
- Safety functions Yes
- Short-circuit recognition Yes
- Response time safety outputs in case of switch-off by safety inputs, maximum 0.5 ms
- Time to readiness, maximum 4,000 ms
- Short circuit detection Yes
- Duration of risk, maximum 200 ms
- Enclosure material Glass-fibre, reinforced thermoplastic
- Active principle RFID, 125 kHz
- Gross weight 393 g
- Coding level according to ISO 14119 Low
- general information Universal coding
- Response time safety outputs in case of switch-off by actuator, maximum 100 ms
- Standards IEC 60947-5-1, EN ISO 13849-1, IEC 61508
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of AZ201CC-T-1P2P on Advantage Electric Supply is $536.00. Order now.
About the product
AZ201CC-T-1P2P Schmersal - Safety switch with separate actuator; Thermoplastic enclosure; RFID-technology for needs-based protection against tampering; Max. length of the sensor chain 200 m; Self-monitoring series-wiring; 3 LEDs to show operating conditions; Sensor technology permi
AZ201CC-T-1P2P Related Documents
Manufacturer warranty
AZ201CC-T-1P2P Schmersal
$536.00
Your price can be lower.
Log in or Create account to check your discount
Backordered – place your order now, and we’ll take care of the rest
Select Qty:
$536.00
$536.00 each
Your order is guaranteed – we’ll keep you updated on delivery timelines
Fast Shipping & Delivery
We deliver nationwide and international
Secure Payment Processing
with money back guarantee
Warranty On All Parts
Manufacturer warranty
Responsive Customer Support
Let us know how we can help!
Need more details?
Feel free to chat with us
Compare AZ201CC-T-1P2P with other products
Current, Utilisation cate...
Voltage, Utilisation cate...
Switching thresholds
Voltage drop Ud, maximum
Classification ZVEI CB24I...
Rated operating current (...
Classification ZVEI CB24I...
Current leakage Ir
Switching frequency, appr...
Operating current
No-load supply current I0
Overvoltage category
Operating voltage, maximu...
Rated impulse withstand v...
Operating voltage, minimu...
Degree of pollution to VD...
Rated insulation voltage ...
Restistance to shock
Protection rating
Resistance to vibrations ...
Note (Relative humidity)
Relative humidity, maximu...
Relative humidity, minimu...
Storage and transport tem...
Storage and transport tem...
Ambient temperature, maxi...
Degree of protection
Ambient temperature, mini...
Wire cross-section, minim...
Height of sensor
Width of sensor
Length of sensor
Wire cross-section, maxim...
Cable section, minimum
Terminal Connector
Note (Cable section)
Cable section, maximum
Series-wiring
Number of safety contacts
Actuating speed, maximum
Latching force
Integral System Diagnosti...
Mechanical life, minimum
Safety functions
Short-circuit recognition
Response time safety outp...
Time to readiness, maximu...
Short circuit detection
Duration of risk, maximum
Enclosure material
Active principle
Gross weight
Coding level according to...
general information
Response time safety outp...
Standards
Switching principle
Switching element
Thermal test current
Utilisation category DC-1...
Utilisation category AC-1...
Depth
Height
Width
Cable entry
Mounting
Actuating stroke
Suitable for elevators
Material of the contacts,...
Actuating panels
Actuating force, approx.
Switchover time, maximum
Bounce duration, maximum
Switching frequency
Degree of protection of c...
Repeat accuracy of switch...
Actuating speed, minimum
Actuating speed
Number of openers
Number of shutters
Contact opening
Actuating force
Terminal (mechanical)
Material of the actuator
Selected product

AZ201CC-T-1P2P
Schmersal
AZ201CC-T-1P2P Schmersal - Safety switch with separate actuator; Thermoplastic enclosure; RFID-techn...
Current, Utilisation category DC130.05 A
Voltage, Utilisation category DC1324 VDC
Switching thresholds−3 V … 5 V (Low), 15 V … 30 ...
Voltage drop Ud, maximum4 V
Classification ZVEI CB24I, SinkC1, C2
Rated operating current (safety outputs)250 mA
Classification ZVEI CB24I, SourceC2
Current leakage Ir0.5 mA
Switching frequency, approx.1 Hz
Operating current50 mA
No-load supply current I0100 mA
Overvoltage categoryIII
Operating voltage, maximum26.4 VDC
Rated impulse withstand voltage Uimp0.8 kV
Operating voltage, minimum20.4 VDC
Degree of pollution to VDE 01003
Rated insulation voltage Ui32 VDC
Restistance to shock30 g / 11 ms
Protection ratingIII
Resistance to vibrations to EN 60068-2-610 … 150 Hz, amplitude 0.35 ...
Note (Relative humidity)non-condensing
Relative humidity, maximum95 %
Relative humidity, minimum30 %
Storage and transport temperature, maximum+85 °C
Storage and transport temperature, minimum-25 °C
Ambient temperature, maximum+70 °C
Degree of protectionIP66 to EN 60529, IP67 to EN...
Ambient temperature, minimum-25 °C
Wire cross-section, minimum23 AWG
Height of sensor220 mm
Width of sensor40 mm
Length of sensor50 mm
Wire cross-section, maximum15 AWG
Cable section, minimum0.25 mm²
Terminal ConnectorSpring pulley connection
Note (Cable section)All indications about the ca...
Cable section, maximum1.5 mm²
Series-wiringYes
Number of safety contacts2
Actuating speed, maximum0.2 m/s
Latching force30 N
Integral System Diagnostics, statusYes
Mechanical life, minimum1,000,000 Operations
Safety functionsYes
Short-circuit recognitionYes
Response time safety outputs in case of switch-off by safety inputs, maximum0.5 ms
Time to readiness, maximum4,000 ms
Short circuit detectionYes
Duration of risk, maximum200 ms
Enclosure materialGlass-fibre, reinforced ther...
Active principleRFID, 125 kHz
Gross weight393 g
Coding level according to ISO 14119Low
general informationUniversal coding
Response time safety outputs in case of switch-off by actuator, maximum100 ms
StandardsIEC 60947-5-1, EN ISO 13849-...
Switching principle-
Switching element-
Thermal test current-
Utilisation category DC-13-
Utilisation category AC-15-
Depth-
Height-
Width-
Cable entry-
Mounting-
Actuating stroke-
Suitable for elevators-
Material of the contacts, electrical-
Actuating panels-
Actuating force, approx.-
Switchover time, maximum-
Bounce duration, maximum-
Switching frequency-
Degree of protection of clips or terminals-
Repeat accuracy of switching points-
Actuating speed, minimum-
Actuating speed-
Number of openers-
Number of shutters-
Contact opening-
Actuating force-
Terminal (mechanical)-
Material of the actuator-
About the manufacturer

Advantage Electric Supply is an authorized Schmersal distributor, proudly offering a comprehensive range of industrial safety solutions that ensure the protection and efficiency of your operations. Schmersal is renowned for their extensive portfolio of safety products designed to meet the highest standards of industrial safety protocols. With a long-standing reputation for innovation and quality, Schmersal delivers cutting-edge solutions that are essential in safeguarding people and machinery across various industries. Their product line includes safety switches, sensors, and interlocking devices that provide reliable protection for personnel and equipment. These products are crucial in preventing accidents and ensuring compliance with international safety regulations in environments such as manufacturing plants, automated production facilities, and food processing industries. Schmersal's safety switches are engineered to detect unsafe conditions and interrupt hazardous processes, thus minimizing risks and enhancing operational safety. Additionally, Advantage Electric Supply offers Schmersal's innovative safety light curtains and laser scanners, which are instrumental in monitoring access to dangerous areas and providing non-contact protection by detecting objects in defined zones. This technology is particularly beneficial in dynamic settings, where traditional guarding methods may not be feasible, allowing for increased flexibility and higher productivity while maintaining stringent safety measures. Furthermore, Schmersal provides safety control units and modules that integrate seamlessly into existing systems, delivering precise control and monitoring capabilities. These components facilitate efficient safety management, reduce downtime, and enhance overall system reliability. By partnering with Schmersal, Advantage Electric Supply ensures that you receive not only superior safety products but also expert guidance on selecting and implementing the right solutions tailored to your specific needs. Our collaboration with Schmersal enables us to offer our customers unparalleled technical support and service, ensuring that every solution we provide is backed by industry-leading expertise. Whether you operate in automotive, pharmaceutical, or logistics sectors, Advantage Electric Supply, in partnership with Schmersal, is committed to helping you achieve optimal safety and operational excellence. Trust in our dedicated service to deliver the most effective solutions that keep your business running smoothly and safely.
Recently viewed products
Relevant products
FAQ
What is the price of AZ201CC-T-1P2P?
The price of AZ201CC-T-1P2P on Advantage Electric Supply is $536.00. Order now.
Out if stock but available for backorder.
We're fully committed to delivering quality you can trust. If something isn't quite right, you have 30 days to return it. And should a part be defective, our 1-year warranty ensures you're covered.
AZ201CC-T-1P2P Schmersal - Safety switch with separate actuator; Thermoplastic enclosure; RFID-technology for needs-based protection against tampering; Max. length of the sensor chain 200 m; Self-monitoring series-wiring; 3 LEDs to show operating conditions; Sensor technology permi
Similar products from: Safety Switches
What can I help you find today?