AZ 16 ST3-AS R Schmersal Safety Switches

Product Details

• Note (AS-i Input module address)
  Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
• AS-i Input module address
  0
• Note (AS-i Parameter bits)
  Set the parameter outputs to "1111" (0xF)
• AS-i Input, Channel 2
  Data bits DI 2 / DI 3 = dynamic code transmission
• AS-i Parameter bits, P0 ... P3
  No function
• AS-i Input, Channel 1
  Data bits DI 0 / DI 1 = dynamic code transmission
• AS-i, ID-Code2
  0xE
• AS-i, ID-Code
  0xB
• AS-i, ID-Code1
  0xF
• AS-i, IO-Code
  0x0
• AS-i Profile
  S-0.B.F.E
• AS-i Version
  V 2.1
• AS-i Specification
  Safety-Slave
• Note (AS-i Operating voltage)
  Protection against polarity reversal
• AS-i Operating voltage AS-i maximum
  31.6 VDC
• Overvoltage category
  III
• Operating Current
  50 mA
• Degree of pollution to VDE 0100
  3
• Rated impulse withstand voltage Uimp
  0.8 kV
• AS-i Operating voltage, minimum
  18 VDC
Rated insulation voltage Ui
32 VDC
Storage and transport temperature, minimum
-25 °C
Storage and transport temperature, maximum
+85 °C
Protection rating
II
Enclosure material
Glass-fibre reinforced thermoplastic, self-extinguishing
Ambient temperature, minimum
-25 °C
Degree of protection
IP67 to EN 60529
Ambient temperature, maximum
+60 °C
Height of sensor
90 mm
Width of sensor
52 mm
Length of sensor
30 mm
Standards
IEC 61508, EN 60947-5-1, EN 62026-2
Latching force
30 N
Gross weight
125 g
Connector position
Left
Mechanical life, minimum
1,000,000 Operations
Terminal Connector
Connector plug M12, 4-pole, (A-coding)
higher Latching force
Yes
Reaction time, maximum
100 ms
Integral System Diagnostics, status
Yes

Related documents AZ 16 ST3-AS R Specs