BC6-30-10-01

ABB Control - BC6-30-10-01

ABB Control

2

KTA7-25S-25A

Manual motor controller, 325 Amps, 18...25 A Current Adjustment Range , Standard Interrupting Capacity

Sprecher + Schuh

1

40.52.8.024.5000

Finder 40.52.8.024.5000 is a relay with solder pin connection type, designed for a rated current of 8A at 250Vac (AC-1) and 8A at 30Vdc (DC-1), with lower current ratings of 0.3A at 110Vdc and 0.12A at 220Vdc for Normally Open (NO) auxiliary contacts. It operates with a supply voltage of 2C/O / DPDT (Double Pole Double Throw), and is suitable for ambient air temperatures ranging from -40 to +85 degrees Celsius for operation and storage. The relay supports a rated voltage of 250Vac, with a control voltage of 6 kV and a rated active power of 2 poles. It features a net width of 25 mm, a mounting mode width of 29 mm, and a power consumption width of 12.4 mm. The color is specified for a 24Vac (50Hz/60Hz) supply, with a residual current sensitivity suitable for PCB and plug-in applications. The visual position indicator has a 5.3mm pins pitch, and the relay is capable of 100,000 operations for Normally Closed (NC) circuits, with a contact material of AgNi+Au (Gold plated silver-nickel), and a durability of 10,000,000 operations.

Finder

6

QT20.241

PULS QT20.241 is a power supply unit designed for DIN rail mounting, featuring AC/DC conversion with a 50% power reserve. It operates within an ambient air temperature range of -25 to +70°C and offers a design that includes a DC-OK relay contact output. The rated current is 20A at 24Vdc and 17.5A at 28Vdc, with a power derating from 12W at +60°C to +70°C. Connection is facilitated through spring-clamp connections. The supply voltage accommodates a wide range with 3-phase input from 323Vac to 576Vac, including nominal voltages of 380Vac, 400Vac, 415Vac, 440Vac, 480Vac, 500Vac, and 525Vac at 47-63Hz, with a turn-ON voltage of 3 x 263Vac and a shutdown voltage of 3 x 242Vac. Its dimensions are W65mm x H124mm x D127mm, housed in aluminium for durability. The QT20.241 supports a 3-phase network, has a net width of 65mm, and provides a rated power of 480W, with a short-term capacity of 720W for up to 4 seconds. The output voltage is adjustable between 24Vdc and 28Vdc, with a maximum output overvoltage protection set between 32Vdc (typical) and 35Vdc (maximum). It includes protection against overvoltage, overload, and short-circuit conditions, and allows for series or parallel operation to increase output power. The unit is designed to handle back-feeding loads up to 34V without malfunctioning. Efficiency rates are 0.948 with a 3x480Vac input and 0.95 with a 3x400Vac input. Peak inrush current consumption is capped at 10A, with a start-up delay between 290-350ms and a hold time of 22ms. Power dissipation losses are 26.4W and 25.3W for 3x480Vac and 3x400Vac inputs, respectively, under full load conditions. Electrical durability spans up to 345000 hours at 25°C with a 10A output and 3AC 400Vac input, with varying durability under different conditions. The ripple is maintained at 100mVpp across a 20Hz to 20MHz range, and the output stage capacitance is 950µF.

Puls

31

SU201M-K20

ABB Control - SU201M-K20

ABB Control

2

SU202MR-K10

ABB Control - SU202MR-K10

ABB Control

6

2D4UL

Circuit Breaker 4A, 2 Pole, 480Y/277V AC, UL489

Altech Corp.

10

SU201M-C15

ABB Control - SU201M-C15

ABB Control

1

BC6-30-10-01

ABB Control - BC6-30-10-01

ABB Control

2

KTA7-25S-25A

Manual motor controller, 325 Amps, 18...25 A Current Adjustment Range , Standard Interrupting Capacity

Sprecher + Schuh

1

40.52.8.024.5000

Finder 40.52.8.024.5000 is a relay with solder pin connection type, designed for a rated current of 8A at 250Vac (AC-1) and 8A at 30Vdc (DC-1), with lower current ratings of 0.3A at 110Vdc and 0.12A at 220Vdc for Normally Open (NO) auxiliary contacts. It operates with a supply voltage of 2C/O / DPDT (Double Pole Double Throw), and is suitable for ambient air temperatures ranging from -40 to +85 degrees Celsius for operation and storage. The relay supports a rated voltage of 250Vac, with a control voltage of 6 kV and a rated active power of 2 poles. It features a net width of 25 mm, a mounting mode width of 29 mm, and a power consumption width of 12.4 mm. The color is specified for a 24Vac (50Hz/60Hz) supply, with a residual current sensitivity suitable for PCB and plug-in applications. The visual position indicator has a 5.3mm pins pitch, and the relay is capable of 100,000 operations for Normally Closed (NC) circuits, with a contact material of AgNi+Au (Gold plated silver-nickel), and a durability of 10,000,000 operations.

Finder

6

QT20.241

PULS QT20.241 is a power supply unit designed for DIN rail mounting, featuring AC/DC conversion with a 50% power reserve. It operates within an ambient air temperature range of -25 to +70°C and offers a design that includes a DC-OK relay contact output. The rated current is 20A at 24Vdc and 17.5A at 28Vdc, with a power derating from 12W at +60°C to +70°C. Connection is facilitated through spring-clamp connections. The supply voltage accommodates a wide range with 3-phase input from 323Vac to 576Vac, including nominal voltages of 380Vac, 400Vac, 415Vac, 440Vac, 480Vac, 500Vac, and 525Vac at 47-63Hz, with a turn-ON voltage of 3 x 263Vac and a shutdown voltage of 3 x 242Vac. Its dimensions are W65mm x H124mm x D127mm, housed in aluminium for durability. The QT20.241 supports a 3-phase network, has a net width of 65mm, and provides a rated power of 480W, with a short-term capacity of 720W for up to 4 seconds. The output voltage is adjustable between 24Vdc and 28Vdc, with a maximum output overvoltage protection set between 32Vdc (typical) and 35Vdc (maximum). It includes protection against overvoltage, overload, and short-circuit conditions, and allows for series or parallel operation to increase output power. The unit is designed to handle back-feeding loads up to 34V without malfunctioning. Efficiency rates are 0.948 with a 3x480Vac input and 0.95 with a 3x400Vac input. Peak inrush current consumption is capped at 10A, with a start-up delay between 290-350ms and a hold time of 22ms. Power dissipation losses are 26.4W and 25.3W for 3x480Vac and 3x400Vac inputs, respectively, under full load conditions. Electrical durability spans up to 345000 hours at 25°C with a 10A output and 3AC 400Vac input, with varying durability under different conditions. The ripple is maintained at 100mVpp across a 20Hz to 20MHz range, and the output stage capacitance is 950µF.

Puls

31

SU201M-K20

ABB Control - SU201M-K20

ABB Control

2

SU202MR-K10

ABB Control - SU202MR-K10

ABB Control

6

2D4UL

Circuit Breaker 4A, 2 Pole, 480Y/277V AC, UL489

Altech Corp.

10

SU201M-C15

ABB Control - SU201M-C15

ABB Control

1

BC6-30-10-01

ABB Control - BC6-30-10-01

ABB Control

2

KTA7-25S-25A

Manual motor controller, 325 Amps, 18...25 A Current Adjustment Range , Standard Interrupting Capacity

Sprecher + Schuh

1

40.52.8.024.5000

Finder 40.52.8.024.5000 is a relay with solder pin connection type, designed for a rated current of 8A at 250Vac (AC-1) and 8A at 30Vdc (DC-1), with lower current ratings of 0.3A at 110Vdc and 0.12A at 220Vdc for Normally Open (NO) auxiliary contacts. It operates with a supply voltage of 2C/O / DPDT (Double Pole Double Throw), and is suitable for ambient air temperatures ranging from -40 to +85 degrees Celsius for operation and storage. The relay supports a rated voltage of 250Vac, with a control voltage of 6 kV and a rated active power of 2 poles. It features a net width of 25 mm, a mounting mode width of 29 mm, and a power consumption width of 12.4 mm. The color is specified for a 24Vac (50Hz/60Hz) supply, with a residual current sensitivity suitable for PCB and plug-in applications. The visual position indicator has a 5.3mm pins pitch, and the relay is capable of 100,000 operations for Normally Closed (NC) circuits, with a contact material of AgNi+Au (Gold plated silver-nickel), and a durability of 10,000,000 operations.

Finder

6

QT20.241

PULS QT20.241 is a power supply unit designed for DIN rail mounting, featuring AC/DC conversion with a 50% power reserve. It operates within an ambient air temperature range of -25 to +70°C and offers a design that includes a DC-OK relay contact output. The rated current is 20A at 24Vdc and 17.5A at 28Vdc, with a power derating from 12W at +60°C to +70°C. Connection is facilitated through spring-clamp connections. The supply voltage accommodates a wide range with 3-phase input from 323Vac to 576Vac, including nominal voltages of 380Vac, 400Vac, 415Vac, 440Vac, 480Vac, 500Vac, and 525Vac at 47-63Hz, with a turn-ON voltage of 3 x 263Vac and a shutdown voltage of 3 x 242Vac. Its dimensions are W65mm x H124mm x D127mm, housed in aluminium for durability. The QT20.241 supports a 3-phase network, has a net width of 65mm, and provides a rated power of 480W, with a short-term capacity of 720W for up to 4 seconds. The output voltage is adjustable between 24Vdc and 28Vdc, with a maximum output overvoltage protection set between 32Vdc (typical) and 35Vdc (maximum). It includes protection against overvoltage, overload, and short-circuit conditions, and allows for series or parallel operation to increase output power. The unit is designed to handle back-feeding loads up to 34V without malfunctioning. Efficiency rates are 0.948 with a 3x480Vac input and 0.95 with a 3x400Vac input. Peak inrush current consumption is capped at 10A, with a start-up delay between 290-350ms and a hold time of 22ms. Power dissipation losses are 26.4W and 25.3W for 3x480Vac and 3x400Vac inputs, respectively, under full load conditions. Electrical durability spans up to 345000 hours at 25°C with a 10A output and 3AC 400Vac input, with varying durability under different conditions. The ripple is maintained at 100mVpp across a 20Hz to 20MHz range, and the output stage capacitance is 950µF.

Puls

31

DA70A0F1N2Z4A020 Red Lion Routers

Part#:DA70A0F1N2Z4A020

Manufacturer:Red Lion

Product condition

DA70A0F1N2Z4A020 Description

Recommended parts

BC6-30-10-01

KTA7-25S-25A

40.52.8.024.5000

QT20.241

SU201M-K20

SU202MR-K10

2D4UL

SU201M-C15

BC6-30-10-01

KTA7-25S-25A

40.52.8.024.5000

QT20.241

SU201M-K20

SU202MR-K10

2D4UL

SU201M-C15

BC6-30-10-01

KTA7-25S-25A

40.52.8.024.5000

QT20.241